I would like to know if the terramaster nas provide this functionality (NUT)?

[Pecassoo]

Hello
I would like to know if the terramaster nas provide this functionality (NUT)?
Or whether this functionality will be planned in the future?
thank you

[outkastm]

Server or client?
Client is working already

[Gremlin]

Although not explicitly stated, the underlying UPS functions within TOS appear to be based on NUT (server & client).

[outkastm]

That's true, but basic config from TOS

viewtopic.php?p=32864#p32864

[Gremlin]

And they won't tell you where the REAL configuration files are (Been there, tried that!)

[Gremlin]

FYI I did a bit more checking. TM have used the 'imaginative' name for the ups of 'ups'

Using basic NUT commands from cli elicits the following:

Code: Select all

 [.........~]# upsc -c ups@localhost
192.168.155.227
127.0.0.1
[........ ~]# upsc ups@localhost
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.mfr.date: 2020/06/13
battery.runtime: 20100
battery.runtime.low: 120
battery.temperature: 22.9
battery.type: PbAc
battery.voltage: 27.7
battery.voltage.nominal: 24.0
device.mfr: American Power Conversion
device.model: IBM UPS1500THV
device.serial: AS0733210431
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: APC HID 0.96
driver.version.internal: 0.41
input.sensitivity: low
input.transfer.high: 257
input.transfer.low: 200
input.voltage: 234.7
output.frequency: 50.3
output.voltage: 234.7
output.voltage.nominal: 230.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.firmware: 601.1I1.I
ups.firmware.aux: 8.1
ups.load: 0.0
ups.mfr: American Power Conversion
ups.mfr.date: 2007/08/14
ups.model: IBM UPS1500THV
ups.productid: 0002
ups.serial: AS0733210431
ups.status: OL
ups.test.result: No test initiated
ups.timer.reboot: -1
ups.timer.shutdown: -1
ups.timer.start: -1
ups.vendorid: 051d