TOS 7.0.0765 Official Release (X86) is Now Available

[RyanYang]

Target Users:
Users currently running TOS 7.0.0746 or later versions.

Note:
If your TOS version is TOS 6, please refer to the TOS 7 update instructions first.

Here, we sincerely thank @B0rg, @rfbjr, @crisisacting, @AlexNo, @ATO3FIX, @star, @Renzz, @Gremlin, @gustang, @JAW, @sewtery, @joka388, @polen, @solovei2, @snapsh0t, @Vanekjin, @Nitrokalel, @greentower, @JSCFORCE, @rcruzleroux, @mab, @Lex, @mnewland, @Metrogeek, @usersky, @Pe6yc, @sianderson, @jpeckinp, @Tessi, @BFG, @FredMutter, @Joesh, and @OttO1916 for your sharing and feedback. Your support helped us quickly identify and fix multiple issues.

Update Notes
Bug Fixes:
1. Fixed an issue where File Manager might fail to start after the update.
2. Fixed an issue where key files in /etc/ssh changed after the update.
3. Fixed an issue where the proxy feature might fail to enable in certain special cases.
4. Fixed an issue where the SNMP service could not start properly.
5. Fixed an issue where the storage pool composition information might be displayed incorrectly in certain special cases.
6. Fixed an issue where users could not log in after renaming a user or user group.
7. Fixed an issue where mounting MEGA and OpenDrive cloud drives failed.

Important Information:
1.Updating the system theoretically will not affect the data on your hard drives, but for safety, please make sure to back up your data in advance.
2.Before updating, ensure that your primary volume (usually volume1) has at least 3GB of available space. Insufficient storage space may cause the update to fail.
3.After the update, the IP address of your TNAS may change. Please use the TNAS PC desktop client to search for and reconnect to the device.

Update Procedure:
1.Go to TOS > Control Panel > General Settings > System > Update, and click "Check for updates."
2.Follow the prompts to update the system.
3.After the system update is complete, you may need to refresh your browser.
4.The TNAS IP address may change after the update. If you cannot connect to your TNAS using the previous IP address, use the TNAS PC client to search for the new IP address.

Client Downloads:
1. Download TNAS PC 5.2.540 for Windows OS.
- MD5: AFB7CD77DE2A4F0434D69D52D15959AF
2. Download TNAS PC 5.2.540 for macOS (x86 architecture).
- MD5: 715FEB00FDB06DF4CC9A228622566F70
3. Download TNAS PC 5.2.540 for macOS (ARM architecture).
- MD5: A6954F192DD23AF7374CF2AF20190B6C
4. Download TNAS PC 5.2.540 for Linux.
- MD5: A5B13A2C2C9B0F9FFFCBDF6F3BA9E342
5. Download TNAS mobile 3.5.077 for Android. (You can also search for "TNAS mobile" in the app store to install.)
6. TNAS Mobile for iOS: Please search for "TNAS mobile" in the App Store to install.

[crisisacting]

Updated testbed devices; so far so good.

Will test throughout this week & next for any issues.

[thierrys73]

hello
The update went smoothly on my F2-221 and my T6-423.

However, it seems to me that the remote folders aren't mounting automatically, even though the option is checked.

thanks

[dgmigdot]

"Update failed! The update decompression failed. Please try again later."
F8 SSD Plus, trying update from 7.0.0746.

UPD: Manual installation -> Success.

[Gremlin]

However, it seems to me that the remote folders aren't mounting automatically, even though the option is checked.

In my case remote folders did auto-mount.

[Gremlin]

Updated F2-221, F2-424, F2-425+. No apparent issues with the update.

[rfbjr]

All three devices updated without issues.

[TMchris]

hello
The update went smoothly on my F2-221 and my T6-423.

However, it seems to me that the remote folders aren't mounting automatically, even though the option is checked.

thanks

Hello, to help us quickly identify the issue, please provide the following information:
1.Remote mount configuration
Please provide the type of remote folder (SMB / WebDAV / NFS / cloud drive).
Also confirm whether all remote folders fail to auto-mount.

2.Log information
Open the Terminal application and run:

Code: Select all

systemctl status clouddisk.service

Please send us the output result.

We will also try to reproduce the issue on our side and help you identify the root cause as soon as possible.

[Pe6yc]

F5-422 after update to 7.0.0765 TerraSync backup task couldn'r find a backup folder on the NAS. I recreated the task and backup works normal

[thierrys73]

hello
The update went smoothly on my F2-221 and my T6-423.

However, it seems to me that the remote folders aren't mounting automatically, even though the option is checked.

thanks

Hello, to help us quickly identify the issue, please provide the following information:
1.Remote mount configuration
Please provide the type of remote folder (SMB / WebDAV / NFS / cloud drive).
Also confirm whether all remote folders fail to auto-mount.

2.Log information
Open the Terminal application and run:

Code: Select all

systemctl status clouddisk.service

Please send us the output result.

We will also try to reproduce the issue on our side and help you identify the root cause as soon as possible.

Hello

SMB

answer of the command
○ clouddisk.service - Cloud Disk Tool
Loaded: loaded (/lib/systemd/system/clouddisk.service; static)
Active: inactive (dead)