If the photo thumbnail is not displayed, try regenerating the thumbnail.
TOS 7.0.0500 Beta (X86) is Released for Update
Re: TOS 7.0.0500 Beta (X86) is Released for Update
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
Re: TOS 7.0.0500 Beta (X86) is Released for Update
sorry to ask but how do I regenerate all thumbnails?
My TNAS
- Device = T6-423
- RAM = 32gb official Terramaster ram
- Disks = 3 x Seagate IronWolf ST400VN006 4TB
- TOS = 7.0.0791
- BIOS = 5.19
- Mobile App = 3.5.0.81
Re: TOS 7.0.0500 Beta (X86) is Released for Update
You can refer to the image description to regenerate the thumbnail.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
Re: TOS 7.0.0500 Beta (X86) is Released for Update
Thankyou
My TNAS
- Device = T6-423
- RAM = 32gb official Terramaster ram
- Disks = 3 x Seagate IronWolf ST400VN006 4TB
- TOS = 7.0.0791
- BIOS = 5.19
- Mobile App = 3.5.0.81
-
randyhenderson
- Posts: 1
- Joined: 05 Apr 2025, 11:21
Re: TOS 7.0.0500 Beta (X86) is Released for Update
Thanks for posting this, same thing happened to me on F4-424 PRO and after about 25 minutes without it restarting I saw you post, crossed my finger and pulled the plug, so far everything seems okay.nedhedrick wrote: ↑09 Apr 2026, 05:16 F4-423 updated with 7.0.0500. Update applied OK. However, reboot after the update never completed. Waited about 15 minutes, then powered-off the unit with the front panel button. Upon restarting, everything worked OK.