How to Properly Install and Use TOS 7 on the 424 Series TNAS

New system installation, system re-install
User avatar
acayon
Posts: 2
Joined: 28 Jun 2026, 03:24
Spain

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by acayon »

Thanks very much. I will try to install.
User avatar
Podrez
Posts: 4
Joined: 24 Jun 2026, 04:38
Moldova

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by Podrez »

MikeZhang wrote: 26 Jun 2026, 18:01
yep) but i needed to reset the NAS and start from the scratch (
User avatar
OlRedRooster
Posts: 7
Joined: 10 Mar 2026, 02:28
Canada

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by OlRedRooster »

I want to upgrade my F4-424 Pro's BIOS from V05 to V08 before I install TOS7. The instructions say to "remove all drives" before performing the BIOS update. I have 4 SATA drives with all my data(TRAID Volume 2), my OS installed on an NVME(Volume 1), and I also have a cache NVME. Do you recommend removing just my data drives before performing the BIOS update, or should I also remove both NVMEs as well?
User avatar
Gremlin
Gold Member
Posts: 1627
Joined: 02 Dec 2022, 22:31
Great Britain

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by Gremlin »

OlRedRooster wrote: 01 Jul 2026, 01:06
You don't need to update your bios and, from what I can determine, you won't see any practical benefit. It is more of a nuisance as you should remove all of your drives - basically to avoid the nas booting into the wrong device wile performing the update. And, if you do go ahead take particular note of step 7. A couple of us seem to have got hung up on that step.
F5-221 TOS7.0.0777 - 4x4TB (Ironwolf) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
User avatar
EriChan
TM Support
Posts: 196
Joined: 06 Jan 2026, 12:27
United States of America

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by EriChan »

OlRedRooster wrote: 01 Jul 2026, 01:06
Your BIOS version does not require any additional adjustments to update and run TOS7 normally.
User avatar
FredMutter
Posts: 89
Joined: 17 Jan 2025, 20:11
France

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by FredMutter »

OlRedRooster wrote: 01 Jul 2026, 01:06 I want to upgrade my F4-424 Pro's BIOS from V05 to V08 before I install TOS7. The instructions say to "remove all drives" before performing the BIOS update. I have 4 SATA drives with all my data(TRAID Volume 2), my OS installed on an NVME(Volume 1), and I also have a cache NVME. Do you recommend removing just my data drives before performing the BIOS update, or should I also remove both NVMEs as well?
1) You don't need it
2) I didn't need it too but I've made it :-) without removing my two NVMes => no problem
Model: F2-424 with TOS 7.0.0777 Bios V08
you can discuss with me in French, German and English
User avatar
justanotheraccount
Posts: 2
Joined: 02 Jul 2026, 04:43
United States of America

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by justanotheraccount »

Is there an issue list of what is fixed and addressed from MADN0101.V05 to MADN0101.V08?
I am trying to resolve an issue and don't want to update unless my issue is specified.
User avatar
Gremlin
Gold Member
Posts: 1627
Joined: 02 Dec 2022, 22:31
Great Britain

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by Gremlin »

Any issues and cause is addressed in post 1 of this thread. If that is your issue then take note. If that does not cover your issue, explain in a separate thread for assistance.
F5-221 TOS7.0.0777 - 4x4TB (Ironwolf) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
User avatar
erikcsellers
Posts: 2
Joined: 25 May 2026, 00:14
United States of America

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by erikcsellers »

I get it that this discussion is not about a changelog for the bios updates but just to put it to rest, please post a changelog on the bios updates so people will know how important or not important it is to update from v5 to v8 for example even though its not needed to get to TOS7. Or at the very least, link it where people can get this answer.
User avatar
OlRedRooster
Posts: 7
Joined: 10 Mar 2026, 02:28
Canada

Re: How to Properly Install and Use TOS 7 on the 424 Series TNAS

Post by OlRedRooster »

erikcsellers wrote: 02 Jul 2026, 22:28 I get it that this discussion is not about a changelog for the bios updates but just to put it to rest, please post a changelog on the bios updates so people will know how important or not important it is to update from v5 to v8 for example even though its not needed to get to TOS7. Or at the very least, link it where people can get this answer.
Agreed, would be nice to know if we're missing important BIOS security updates or not.
I'm staying on V05 for now, the upgrade to TOS7 went perfectly.
Post Reply

Return to “Initialization & Installation”