From F2-221
8,0 1 1 0.000000000 0 C RA 5303704 + 32 [0]
8,0 1 2 0.000525831 15330 A RA 4718008 + 72 <- (9,9) 4709816
8,0 1 3 0.000526499 15330 A RA 5303736 + 72 <- (8,2) 4718008
8,0 1 4 0.000526720 15330 Q RA 5303736 + 72 [blkparse]
8,0 1 5 0.000534723 15330 G RA 5303736 + 72 [blkparse]
8,0 1 6 0.000536178 15330 P N [blkparse]
8,0 1 7 0.000537897 15330 U N [blkparse] 1
8,0 1 8 0.000539023 15330 I RA 5303736 + 72 [blkparse]
8,0 1 9 0.000552232 15330 D RA 5303736 + 72 [blkparse]
8,0 1 10 0.001230048 0 C RA 5303736 + 72 [0]
8,0 1 11 0.353246244 265 A FWFSM 585744 + 1 <- (8,2) 16
8,0 1 12 0.353246660 265 Q FWFSM 585744 + 1 [md9_raid1]
8,0 1 13 0.353249514 265 G FWFSM 585744 + 1 [md9_raid1]
8,0 1 14 0.353274586 193 D FN [kworker/1:1H]
8,0 1 15 0.354813824 0 C FN 0 [0]
8,0 1 16 0.354887701 193 I WSM 585744 + 1 [kworker/1:1H]
8,0 1 17 0.354924093 193 D WSM 585744 + 1 [kworker/1:1H]
8,0 1 18 0.355335345 0 C WSM 585744 + 1 [0]
8,0 1 19 0.355399071 193 D FN [kworker/1:1H]
8,0 1 20 0.385493463 0 C FN 0 [0]
8,0 1 21 0.385502855 0 C WSM 585744 [0]
8,0 1 22 0.385713526 265 A FWFSM 585736 + 1 <- (8,2) 8
8,0 1 23 0.385713894 265 Q FWFSM 585736 + 1 [md9_raid1]
8,0 1 24 0.385715388 265 G FWFSM 585736 + 1 [md9_raid1]
8,0 1 25 0.385722726 193 D FN [kworker/1:1H]
8,0 1 26 0.386690662 0 C FN 0 [0]
8,0 1 27 0.386759219 193 I WSM 585736 + 1 [kworker/1:1H]
8,0 1 28 0.386765345 193 D WSM 585736 + 1 [kworker/1:1H]
8,0 1 29 0.387160972 0 C WSM 585736 + 1 [0]
8,0 1 30 0.387224370 193 D FN [kworker/1:1H]
8,0 1 31 0.418668406 0 C FN 0 [0]
8,0 1 32 0.418680192 0 C WSM 585736 [0]
8,0 1 33 0.418850709 10852 A W 1865216 + 264 <- (9,9) 1857024
8,0 1 34 0.418918777 10852 A FWFSM 585744 + 1 <- (8,2) 16
8,0 1 35 0.418919083 10852 Q FWFSM 585744 + 1 [kworker/u10:2]
8,0 1 36 0.418920718 10852 G FWFSM 585744 + 1 [kworker/u10:2]
8,0 1 37 0.418927406 193 D FN [kworker/1:1H]
8,0 1 38 0.419586042 0 C FN 0 [0]
8,0 1 39 0.419596958 193 I WSM 585744 + 1 [kworker/1:1H]
8,0 1 40 0.419631179 193 D WSM 585744 + 1 [kworker/1:1H]
8,0 1 41 0.419923634 0 C WSM 585744 + 1 [0]
8,0 1 42 0.420001099 193 D FN [kworker/1:1H]
8,0 1 43 0.451850861 0 C FN 0 [0]
8,0 1 44 0.451859655 0 C WSM 585744 [0]
8,0 1 45 0.451914429 10852 A W 2450944 + 264 <- (8,2) 1865216
8,0 1 46 0.451916334 10852 Q W 2450944 + 264 [kworker/u10:2]
8,0 1 47 0.451931100 10852 G W 2450944 + 264 [kworker/u10:2]
8,0 1 48 0.451932614 10852 P N [kworker/u10:2]
8,0 1 49 0.451942559 10852 U N [kworker/u10:2] 1
8,0 1 50 0.451944254 10852 I W 2450944 + 264 [kworker/u10:2]
8,0 1 51 0.451961494 10852 D W 2450944 + 264 [kworker/u10:2]
8,0 1 52 0.452849310 0 C W 2450944 + 264 [0]
8,0 0 1 0.745930253 1144 A WS 434960 + 16 <- (9,9) 426768
8,0 0 2 0.745935689 1144 A WS 1020688 + 16 <- (8,2) 434960
8,0 0 3 0.745936117 1144 Q WS 1020688 + 16 [postgres]
8,0 0 4 0.745946600 1144 G WS 1020688 + 16 [postgres]
8,0 0 5 0.745948381 1144 P N [postgres]
8,0 0 6 0.745954520 1144 U N [postgres] 1
8,0 0 7 0.745955752 1144 I WS 1020688 + 16 [postgres]
8,0 0 8 0.745970169 1144 D WS 1020688 + 16 [postgres]
8,0 0 9 0.746721855 0 C WS 1020688 + 16 [0]
8,0 0 10 0.746885618 1144 Q FW [postgres]
8,0 0 11 0.746927152 1144 G FW [postgres]
8,0 0 12 0.746960359 54 D FN [kworker/0:1H]
8,0 0 13 0.756706569 17 C FN 0 [0]
8,0 0 14 0.756718685 17 C WS 0 [0]
8,0 1 53 1.158056930 265 A FWFSM 585744 + 1 <- (8,2) 16
8,0 1 54 1.158057465 265 Q FWFSM 585744 + 1 [md9_raid1]
8,0 1 55 1.158061245 265 G FWFSM 585744 + 1 [md9_raid1]
8,0 1 56 1.158069866 193 D FN [kworker/1:1H]
8,0 1 57 1.158981485 0 C FN 0 [0]
8,0 1 58 1.159031563 193 I WSM 585744 + 1 [kworker/1:1H]
8,0 1 59 1.159044799 193 D WSM 585744 + 1 [kworker/1:1H]
8,0 1 60 1.159397149 0 C WSM 585744 + 1 [0]
8,0 1 61 1.159460274 193 D FN [kworker/1:1H]
8,0 1 62 1.181612418 0 C FN 0 [0]
8,0 1 63 1.181623806 0 C WSM 585744 [0]
8,0 1 64 1.190806221 265 A FWFSM 585736 + 1 <- (8,2) 8
8,0 1 65 1.190806593 265 Q FWFSM 585736 + 1 [md9_raid1]
8,0 1 66 1.190810523 265 G FWFSM 585736 + 1 [md9_raid1]
8,0 1 67 1.190819353 193 D FN [kworker/1:1H]
8,0 1 68 1.191652225 0 C FN 0 [0]
8,0 1 69 1.191704506 193 I WSM 585736 + 1 [kworker/1:1H]
8,0 1 70 1.191711049 193 D WSM 585736 + 1 [kworker/1:1H]
8,0 1 71 1.192122714 0 C WSM 585736 + 1 [0]
8,0 1 72 1.192186737 193 D FN [kworker/1:1H]
8,0 1 73 1.214643814 0 C FN 0 [0]
8,0 1 74 1.214670511 0 C WSM 585736 [0]
8,0 0 15 4.500418046 15337 D R 36 [smartctl]
8,0 0 16 4.500448824 17 C R [0]
8,0 0 17 4.500525155 15337 D N 0 [smartctl]
8,0 0 18 4.500860936 0 C N [0]
8,0 0 19 4.500942406 15337 D R 512 [smartctl]
8,0 0 20 4.503831767 0 C R [0]
8,0 0 21 4.518652105 15337 D R 512 [smartctl]
8,0 0 22 4.567036492 1144 C R [0]
TOS 7.0.0706 Beta (X86) is Released for Update
Re: TOS 7.0.0706 Beta (X86) is Released for Update
F2-221 6 Gb RAM - 2x8TB
F4-425 16 Gb RAM - 4x4TB
F4-425 16 Gb RAM - 4x4TB
Re: TOS 7.0.0706 Beta (X86) is Released for Update
This update erased everything i had on Volume1 includeing VMS, Storage, Docker, apps, everything was wiped clean
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Not much info, but according to your previous posts you appear to have 3 TM nas devices. Which one are you talking about here - or is it all of them?
F5-221 TOS7.0.0777 - 4x4TB (Ironwolf) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
Re: TOS 7.0.0706 Beta (X86) is Released for Update
f6-424 max , atm i have 5 and 3 das tnas models. but all of them high end f4 max and f6 max and so on.
what ever the update did. i sent in diagnostic info to terramaster but what ever the update did it wiped the volume1 clean.
settings, users, firewall, snapshots, vms, dockers, everything completly clean.
what ever the update did. i sent in diagnostic info to terramaster but what ever the update did it wiped the volume1 clean.
settings, users, firewall, snapshots, vms, dockers, everything completly clean.
Re: TOS 7.0.0706 Beta (X86) is Released for Update
I have lost my USB backup drive. Getting following error. USB drive works fine on PC when I move it over. Putting it back on TM, same thing.
Mounting USB devices requires pre-existing volumes. Please create a volume first, then reinsert the USB device.
------------------------------------------------------------
Device name: TNAS-01952a
Model: F2-221
TOS version: TOS_X642.0_7.0.0706
Mounting USB devices requires pre-existing volumes. Please create a volume first, then reinsert the USB device.
------------------------------------------------------------
Device name: TNAS-01952a
Model: F2-221
TOS version: TOS_X642.0_7.0.0706
- Nitrokalel
- Posts: 37
- Joined: 24 Apr 2024, 05:51

Re: TOS 7.0.0706 Beta (X86) is Released for Update
SIGUE AVANZANDO LA ACTUALIZACION ME DA MUCHO GUSTO, pero hay mucho por hacer, 1.- cuando abro docker manager o alguna otra aplicacion me manda al centro de actualizaciones a activar la aplicacion, es molesto no se porque pasa, 2.- cuando me conecto por vpn protocolo openvpn, no aparece el numero de conecciones activas, 3.- virtual box dejo de funcionar por la dependencia que falta de php, yo lo logre hechar anadar con php 7.4,
la pregunta es ¿si sabemos que requerimos esta dependencia porque no la integramos por defecto para que no haya problemas?
un nas debe ser confiable a lo largo del tiempo debe ser fiable. 4.- open office se queda cargando documento nuevo y no puedo usarlo no pasa en todos los dispositivos solo en los f8 ssdplus
vamos por buen camino y felicidades.
The update is progressing well, which I'm very happy about, but there's still a lot to do. 1. When I open Docker Manager or any other application, it sends me to the update center to activate the application. It's annoying; I don't know why it happens. 2. When I connect via VPN using the OpenVPN protocol, the number of active connections doesn't appear. 3. VirtualBox stopped working due to a missing PHP dependency. I managed to get it working with PHP 7.4.
The question is, if we know we need this dependency, why don't we integrate it by default to avoid problems? A NAS should be reliable over time. 4. OpenOffice gets stuck loading a new document, and I can't use it. This doesn't happen on all devices, only on the F8 SSDPlus.
We're on the right track, and congratulations!
F8 SSD Plus (8x4TB NVMe, TRaid, 48GB, prod) UPDATE OK
F8 SSD Plus (6x1TB+2x2TB, TRaid, 48GB, beta) UPDATE OK
F4-424 Pro (2x22TB+2x10TB HDD +1TB+500GB NVMe, TRaid, 32GB, beta) NOT JET
F2-423 (2x18TB, TRaid, 32GB, beta)NOTJET
F2-221 (6TB+10TB, TRaid, 10GB, beta) UPDATE OK
D1 SSD (2TB, prod) IS RECOGNIZED

la pregunta es ¿si sabemos que requerimos esta dependencia porque no la integramos por defecto para que no haya problemas?
un nas debe ser confiable a lo largo del tiempo debe ser fiable. 4.- open office se queda cargando documento nuevo y no puedo usarlo no pasa en todos los dispositivos solo en los f8 ssdplus
vamos por buen camino y felicidades.
The update is progressing well, which I'm very happy about, but there's still a lot to do. 1. When I open Docker Manager or any other application, it sends me to the update center to activate the application. It's annoying; I don't know why it happens. 2. When I connect via VPN using the OpenVPN protocol, the number of active connections doesn't appear. 3. VirtualBox stopped working due to a missing PHP dependency. I managed to get it working with PHP 7.4.
The question is, if we know we need this dependency, why don't we integrate it by default to avoid problems? A NAS should be reliable over time. 4. OpenOffice gets stuck loading a new document, and I can't use it. This doesn't happen on all devices, only on the F8 SSDPlus.
We're on the right track, and congratulations!
F8 SSD Plus (8x4TB NVMe, TRaid, 48GB, prod) UPDATE OK
F8 SSD Plus (6x1TB+2x2TB, TRaid, 48GB, beta) UPDATE OK
F4-424 Pro (2x22TB+2x10TB HDD +1TB+500GB NVMe, TRaid, 32GB, beta) NOT JET
F2-423 (2x18TB, TRaid, 32GB, beta)NOTJET
F2-221 (6TB+10TB, TRaid, 10GB, beta) UPDATE OK
D1 SSD (2TB, prod) IS RECOGNIZED

F8 SSD Plus (8x4TB NVMe, TRaid, 48GB, prod)
F8 SSD Plus (6x1TB+2x2TB, TRaid, 48GB, beta)
F4-424 Pro (2x22TB+2x10TB HDD +1TB+500GB NVMe, TRaid, 32GB, beta)
F2-423 (2x18TB, TRaid, 32GB, beta)
F2-221 (6TB+10TB, TRaid, 10GB, beta)
D1 SSD (2TB, prod)
F8 SSD Plus (6x1TB+2x2TB, TRaid, 48GB, beta)
F4-424 Pro (2x22TB+2x10TB HDD +1TB+500GB NVMe, TRaid, 32GB, beta)
F2-423 (2x18TB, TRaid, 32GB, beta)
F2-221 (6TB+10TB, TRaid, 10GB, beta)
D1 SSD (2TB, prod)
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Found issue trying to setup new backup using USB COPY app.
I setup the location to save the backup to and it just randomly picks one of my drives and then when it tries to backup it fails.
The destination on both of these backups should be the same but for some reason the first one(Jane Pictures)gives drive SDG and the actual drive name is SDF. The few times I've tried it the name has changed from SDE, SDI and SDG and all 3 are valid drives in my Drive bay.
The Plex Backup runs just fine but it was a backup that I had setup months ago and is going to SDF like it should.


I setup the location to save the backup to and it just randomly picks one of my drives and then when it tries to backup it fails.
The destination on both of these backups should be the same but for some reason the first one(Jane Pictures)gives drive SDG and the actual drive name is SDF. The few times I've tried it the name has changed from SDE, SDI and SDG and all 3 are valid drives in my Drive bay.
The Plex Backup runs just fine but it was a backup that I had setup months ago and is going to SDF like it should.


Current System:
F4-424 Pro
40TB storage.
TOS- 7.0.0746
F4-424 Pro
40TB storage.
TOS- 7.0.0746
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Our system update package will not affect your data. Your situation may be somewhat unique and may be caused by some unknown reasons. Please schedule remote technical support through our online chat window on our official website(https://salesiq.zohopublic.com/signatur ... 97d0be8892), and we will help you troubleshoot the problem.star wrote: ↑12 Jun 2026, 21:06 f6-424 max , atm i have 5 and 3 das tnas models. but all of them high end f4 max and f6 max and so on.
what ever the update did. i sent in diagnostic info to terramaster but what ever the update did it wiped the volume1 clean.
settings, users, firewall, snapshots, vms, dockers, everything completly clean.
-
storageninja
- Posts: 64
- Joined: 06 Aug 2025, 14:32

Re: TOS 7.0.0706 Beta (X86) is Released for Update
I did re-install MariaDB+phpMyadmin+MyWebSQL but all ends in:
502 Bad Gateway
nginx/1.18.0 (Ubuntu)
Could we debug this? It seems that its not working fine on an F4-SSD, has to do with the warning in the release notes about the root filesystem?
502 Bad Gateway
nginx/1.18.0 (Ubuntu)
Could we debug this? It seems that its not working fine on an F4-SSD, has to do with the warning in the release notes about the root filesystem?
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Thank you for your feedback.
As this issue requires further investigation of the system logs and related service status, we would like to arrange a remote troubleshooting session to help identify the root cause more accurately.
If it is convenient for you, please contact us through our online support chat to schedule a remote support session with one of our engineers:
https://salesiq.zohopublic.com/signatur ... 97d0be8892
Thank you for your cooperation and support. We look forward to assisting you further.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)




