TOS 7.0.0567 Beta (X86) is Released for Update

[Joesh]

I was able to find the old update package 7.0.0299 (used for previous update from tos6 to tos7) - it also put nas to the initialization mode and rolled back to 6.0.794
Log file of the failed update:
https://limewire.com/d/VGgS8#zhGdiNwlLF

I had the old update package 7.0.0299, I can upload it if you still need it
https://www.mediafire.com/file/ivqy58cb ... 4.bz2/file

[MikeZhang]

There is no error related to update failure, please visit our official online chat to book remote session for further troubleshoot.

[joka388]

Updated on F2-221 and F4-425, no issues.

[ctmutlow]

Hi

I am seeing the messages below on my console are they normal?

Is there a bios issue?

Why are tasks timing out, I have 24GB RAM?

Thank you in advance.

[ 12.037576] openvswitch: Open vSwitch switching datapath
[ 12.072001] hub 1-0:1.0: USB hub found
[ 12.072396] hub 1-0:1.0: 12 ports detected
[ 12.073166] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.073906] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 12.076505] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.077221] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._UPC due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 12.084919] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.085704] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 12.087003] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.087770] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 12.090752] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.091563] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._UPC due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 12.109855] r8169 0000:01:00.0 eth0: RTL8126A, 6c:bf:b5:04:77:10, XID 64a, IRQ 153
[ 12.110351] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 12.112910] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.113899] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)

and

[ 12.510758] usb 1-1: New USB device found, idVendor=0bda, idProduct=5423, bcdDevice= 1.86
[ 12.511069] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 12.511366] usb 1-1: Product: 4-Port USB 2.0 Hub
[ 12.511682] usb 1-1: Manufacturer: TerraMaster
[ 12.512073] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.512674] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 12.513973] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.514582] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 12.515224] hub 1-1:1.0: USB hub found
[ 12.516511] hub 1-1:1.0: 5 ports detected
[ 12.619500] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[ 12.635627] usb 2-3: New USB device found, idVendor=0bda, idProduct=0423, bcdDevice= 1.86
[ 12.635982] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 12.636314] usb 2-3: Product: 4-Port USB 3.2 Hub
[ 12.636640] usb 2-3: Manufacturer: TerraMaster
[ 12.640594] hub 2-3:1.0: USB hub found
[ 12.641280] hub 2-3:1.0: 4 ports detected
[ 12.747518] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 12.874368] usb 1-2: New USB device found, idVendor=1908, idProduct=1320, bcdDevice= 0.00
[ 12.874692] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.874999] usb 1-2: Product: TerraMaster
[ 12.875303] usb 1-2: Manufacturer: TNAS
[ 12.875599] usb 1-2: SerialNumber: HZV76431
[ 12.875955] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.876565] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 12.878090] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 12.878714] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 12.879483] usb-storage 1-2:1.0: USB Mass Storage device detect

Also

[ 9954.7875881 INFO: task PMS LibUpdater:42966 blocked for more than 122 seconds
L 9954.7876191
Tainted: G
6.12.63+ #15
L 9954.7876301
"echo 0 › /proc/sys/kernel/hung_task timeout_secs" disables this message:
[10200.5572981
INFO: task btrfs-transacti:2036 blocked for more than 122 seconds.
[10200.557326]
Tainted: G
DE
[10200.557337]
6.12.63+ #15
"echo 0 › /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[10200.557602]
INFO: task PMS Logger: 7148 blocked for more than 122 seconds.
[10200.557614]
Tainted: G
OE
[10200.557624]
6.12.63+ #15
is a sees nis mess
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[10200.557964]
[10200.557975]
INFO: task PMS LibUpdater: 43571 blocked for more than 122 seconds.
Tainted: G
6.12.63+ #15
[10200.5579861
[10200.5582121
"echo
0>/proc/sys/kernel/hung_
task_timeout_secs" disables this message.
INFO: task PMS BPQ Events: 43652 blocked for more than 122 seconds.
[10200.5582301
Tainted: G
[10200.558240]
6.12.63+ #15
"echo 0 › /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[10323.442134]
INFO: task PMS Logger:7148 blocked for more than 245 seconds.
[10323.442160]
Tainted: G
6.12.63+ #15
[10323.442171]
[10323.442612]
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
INFO: task PMS LibUpdater: 43571 blocked for more than 245 seconds.
[10323.442626]
Tainted: G
6.12:63+ #15
[10323.4426361
"echo 0›/proc/sys/kernel/hung_task_timeout_secs" disables this message.
[10323.442922]
INFO: task PMS BPQ Events: 43652 blocked for more than 245 seconds.
[10323.44Z935]
Tainted: G
6.12.63+ #15"
[10323.442945] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[10446.326909]
INFO: task btrfs-cleaner:2035 blocked for more than 122 seconds.
[10446.326936]
Tainted: G
6.12.63+ #15
[10446.3269471 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[10446.327479] INFO: task PMS Logger:7148 blocked for more than 368 seconds.
[10446.327491]
Tainted: G«
6.12.63+ #15
[10446.327501] "echo 0 › /proc/sys/kernel/hung_task_timeout_secs" disables this message.

[MikeZhang]

The issue where the `btrfs-cleaner` process continuously consumes memory or causes the system to freeze is a known problem. When `btrfs-cleaner` is triggered, the only current workaround is to increase (expand) the system's memory capacity; other tasks can only resume normal operation once the `btrfs-cleaner` process has completed.

[ctmutlow]

Thank you for your reply, I already have 24Gb in my F4 SSD so it seems a bit overkill to go and buy a replacement 32Gb card.

Is there a timetable for a fix?

I have see on the web that interactions between quotas being enabled and there being multiple snapshots of can cause this memory issue.

I have now disabled quotas and it seems more stable, is there anything else I can try, please like purging snapshots?

Many thanks.

[Shadeofspirit]

hi, i had checked md5 and everything is correct.
I have F2-425 plus NAS.
I believe, the boot order is default - i didn't change bios settings.
BIOS version: MTWL0101.V07

In case it will help smbd:
As well option "TOS boot first" was enabled in bios, I was not able to modify the boot order. I disabled it, in boot order moved TOS drive to the end of the list, enable "TOS boot first".
After that I was able to get TOS 7 back and install updates.
Alternatively, it is also possible just to remove TOS recovery drive (depending on nas model, it is a regular USB drive or a USB dom drive plugged inside the nas)

[MikeZhang]

Based on the report you posted above, btrfs-cleaner will consume memory resources until the process ends before executing subsequent tasks. Currently, the best solution is to add more memory modules to the NAS, and wait patiently

[ctmutlow]

Thanks, turn off disk quotas seems to have fixed the issue - the system is now more snappy

[andreyzhukov]

Проблема:
Фото с айфона не синхронизируются - 3 штуки из 49000 и намертво встаёт процесс - в чем дело?