TOS 7.0.0559 Beta (X86) is Released for Update

[rfbjr]

I see duplicate notifications/emails for rsync jobs.These happen to be recurring ones, if that matters.

Also I happen to notice new notification options for various apps, under control panel/notifications. While all the new options are turned on by default for each, the email isn't. Just more of an FYI.

[Nitrokalel]

todos mis dispositivos se actualizaron sin ningun problema, todo OK la aplicacion de virtual box sigue funcionando y la aplicacion de VMs tambien en otros dispositivos, exelente actualizacion cada vez menos errores felicidades.

[Joesh]

My version of USBCopy is 2.1.170, is that the latest version? Maybe future posts could include what the version of x app should be?

The newest version is 2.1.184

BTW updates successfully on my F2-423

[luismartin]

I have 12 disks in RAID 5 (200TB) and a couple of days ago I installed a 1TB M.2 as a balanced hypercache.
When I boot the enclosure, disk and hypercache activity reading and writing is frantic for almost 3 hours.
Is this a normal behavior how is working hypercache?
Naturally, I've disabled hypercache while awaiting your response.

[TMzethar]

The sync was triggered because the system won't fully come up during one of the reboots, I couldn't putty in and had no choice to force power off the unit.
As requested: TOS_SystemReport_20260429_064241.zip
(My Onedrive link)
https://1drv.ms/f/s!AgP4K-RskQ9MjLwJvJG ... Q?e=2GWq4N

Is this a system report related to issues with the PostgreSQL service and filemanager service?
Found PCIe correctable error record, unsure if it is related to the issue you encountered Does this problem occur by chance rather than always?
We will continue to check in order to discover something

[TMzethar]

I see duplicate notifications/emails for rsync jobs.These happen to be recurring ones, if that matters.
Also I happen to notice new notification options for various apps, under control panel/notifications. While all the new options are turned on by default for each, the email isn't. Just more of an FYI.

Recorded, will verify the issue.

[TMzethar]

I have 12 disks in RAID 5 (200TB) and a couple of days ago I installed a 1TB M.2 as a balanced hypercache.
When I boot the enclosure, disk and hypercache activity reading and writing is frantic for almost 3 hours.
Is this a normal behavior how is working hypercache?
Naturally, I've disabled hypercache while awaiting your response.

Based on the existing information, we are currently unable to guess the reason You can consider observing the DiskIO read and write status of processes and devices through the following commands on the terminal:

Code: Select all

pidstat -d 3
iostat 3

[rfbjr]

I might do that on my f6 it has 6 x 8tb drives and after every boot the disks go busy for about an hour. It like the cache is comparing its data for each disk. IMO

[TMzethar]

The sync was triggered because the system won't fully come up during one of the reboots, I couldn't putty in and had no choice to force power off the unit.
As requested: TOS_SystemReport_20260429_064241.zip
(My Onedrive link)
https://1drv.ms/f/s!AgP4K-RskQ9MjLwJvJG ... Q?e=2GWq4N

Additionally, after restarting the NAS, will errors related to the FileManager service, PostgreSQL service, and PCIE (M.2) still occur?
Has the Correctible Error of PCIE (M.2) also occurred before?
How long does your F4-424 last?

[rage]

After this last update, 2 of my 3 devices came back fine

The other one I see the following

Failed to retrieve data
502 Bad Gateway when running file manager

I seem to have large PostGres files

3.4G /etc/postgresql/13/main/base
3.5G /etc/postgresql/13/main