Hi
Bought 3 of these , I have them filled with 4 x 3T drives . they are connected to dell 1ru server
and running proxmox. problem is when i reboot my servers - when the kernel load - slot 3 dies - I have to whilst its rebooting unslot and re slot slot #3 for it to be seen
[Help] Issue with Hybrd d8
Re: [Help] Issue with Hybrd d8
Hi.
Is this issue occurring on one of the D8 Hybrids?
What phenomenon would occur if you swap the HDDs in Slot3 and Slot4?
Would a similar situation occur if you connect this D8 Hybrid to another computer/server?
Is this issue occurring on one of the D8 Hybrids?
What phenomenon would occur if you swap the HDDs in Slot3 and Slot4?
Would a similar situation occur if you connect this D8 Hybrid to another computer/server?
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
-
keyzersuze
- Posts: 2
- Joined: 03 Dec 2025, 14:04
Re: [Help] Issue with Hybrd d8
All 3 suffer and I have replaced slot 3 a few times I thought the drives were faculty. Then I worked out it was the enclosure.
Re: [Help] Issue with Hybrd d8
Are you using the original C to C cable? If you are using a non-original cable, please use the shortest possible cable or add an active USB hub to enhance the signal.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)