TOS 6.0.794 (X86) is Released for Update

[RyanYang]

Target Users:
Users currently running TOS 6.0.770 or later versions.

Note:
If your TOS version is TOS 5, please refer to the TOS 6 update instructions first

Here, we sincerely thank user vitali，B0rg，Ludovic，addx972，mmick，bartmans99，billyBob and others, for their sharing and feedback. It is your support that has enabled us to quickly identify and resolve some issues.

Update Notes
Bugs fixed:
1. Fixed an issue that prevented connection to some OpenVPN servers.
2. Fixed an issue that prevented the generation of thumbnails for some video files.
3. Fixed an issue that could cause errors when transferring a large number of files via SMB on macOS.
4. Fixed an issue that prevented the installation of TOS when the BIOS time was abnormal.
5. Fixed issues with the UPS.
6. Fixed issues with the SPC.
7. Fixed an issue that could prevent the system from booting according to the scheduled power plan.
8. Fixed issues with TNAS.online.
9. Fixed other known issues.
10. Optimized the boot process, which reduced the boot time.
11. Updated the firmware for the F8 SSD / F8 SSD Plus.
12. Updated the system certificates.

Important Information:
1.Updating the system theoretically will not affect the data on your hard drives, but for safety, please make sure to back up your data in advance.
2.Before updating, ensure that your primary volume (usually volume1) has at least 3GB of available space. Insufficient storage space may cause the update to fail.
3.After the update, the IP address of your TNAS may change. Please use the TNAS PC desktop client to search for and reconnect to the device.

Update Procedure:
1.Go to TOS > Control Panel > General Settings > System > Update, and click "Check for updates."
2.Follow the prompts to update the system.
3.After the system update is complete, you may need to refresh your browser.
4.The TNAS IP address may change after the update. If you cannot connect to your TNAS using the previous IP address, use the TNAS PC client to search for the new IP address.

Other Software Downloads:
Download TNAS PC 5.2.506 for Windows OS:
https://download3.terra-master.com/App ... 2.506.exe
Download TNAS PC 5.2.506 for macOS (x86 and ARM architecture):
https://download3.terra-master.com/Apps ... .2.506.pkg
Download TNAS PC 5.2.506 for macOS (ARM architecture):
https://download3.terra-master.com/Apps ... .2.506.pkg
Download TNAS Mobile 3.4.023 for Android:
https://download2.terra-master.com/TNAS ... .4.023.apk
TNAS Mobile for iOS: Download from the iOS App Store.

[FredMutter]

3. Fixed an issue that could cause errors when transferring a large number of files via SMB on macOS.

Update done without any problems.
And you should do more tests with MacOS: Every new version brings new solutions and new problems too :-/

[DCCentR]

12. Updated the system certificates.

What date should the new certificates have? Currently, it is as follows:

It was the same before the update.

[athurdent]

11. Updated the firmware for the F8 SSD / F8 SSD Plus.

Is that applied automatically and what is the change log / fix? I had to update PCIe firmware manually in the past ( viewtopic.php?p=49736#p49736 )
Is this the same update, now integrated or does it update something else? How do I check if it applied correctly, like I could with the update linked above?

[RyanYang]

Yes, the firmware update included in this system update is the same one you previously performed manually. Therefore, there is no need to repeat the update. The method to verify whether it was applied successfully matches exactly what was described in the post you referenced—you can confirm it just as you did last time.

[RyanYang]

It was the same before the update.

This certificate update is only visible in certain scenarios, so your certificates likely renewed automatically even before this update.

[rfbjr]

Updated my F4-223 seems fine so far. The update dialog box only got to 9% then I heard the unit beep. I assumed the update was complete.
Waited a few minutes and refreshed the browser. All is fine.
Next is the F4-424 Pro but a bit later.

[athurdent]

Yes, the firmware update included in this system update is the same one you previously performed manually. Therefore, there is no need to repeat the update. The method to verify whether it was applied successfully matches exactly what was described in the post you referenced—you can confirm it just as you did last time.

Thanks, update of an F8 SSD went fine.

[sianderson]

F2-424 updated successfully
my F2-423 is running some long processing tasks at the moment but should be complete by the weekend so will update when its complete

[rfbjr]

Ok F4-424 Pro updated, no issues.
LUN was reattached to the Windows client after this NAS was rebooted.