F$-424 pro nvnm disk 2 to hot

[andrevanderweide]

My f4-424 pro give this Disk tenperature too high, Disk name: NVMe Disk2
but when i lok with infra red he is 24-25C als NVMe drive 1 is also not hot
I have tos 6.0.577 Bios/initBoot MADNo1o1.v05

[TMroy]

what is your disk model and brand? it is on the compatible list?

[andrevanderweide]

its a samsung 1tb 980 same is on the list i put yesterday coolingblok on it and last night its ok no overheating message more .
i wil keep looking the next days if it occurs again

[andrevanderweide]

i had it again

[andrevanderweide]

few minutes ago i reinstall photos app and i did get the same again

[TMzethar]

We have recorded individual M.2 SSDs with one too high and one normal temperature for both sensors.
We suggest you to check through this command to see if your SSD has a similar situation:

Code: Select all

nvme smart-log /dev/sdzb

[andrevanderweide]

Smart Log for NVME device:sdzb namespace-id:ffffffff
critical_warning : 0
temperature : 39 C (312 Kelvin)
available_spare : 100%
available_spare_threshold : 10%
percentage_used : 1%
endurance group critical warning summary: 0
data_units_read : 21300142
data_units_written : 17749749
host_read_commands : 379550001
host_write_commands : 324351936
controller_busy_time : 901
power_cycles : 606
power_on_hours : 401
unsafe_shutdowns : 34
media_errors : 0
num_err_log_entries : 0
Warning Temperature Time : 4
Critical Composite Temperature Time : 0
Temperature Sensor 1 : 39 C (312 Kelvin)
Temperature Sensor 2 : 35 C (308 Kelvin)
Thermal Management T1 Trans Count : 0
Thermal Management T2 Trans Count : 954
Thermal Management T1 Total Time : 0
Thermal Management T2 Total Time : 218