TOS 5.1.103 (X86) is Released for Update

[JakeF150]

F2-220
5.1.95 - > 5.1.103
No issue

[CraftyClown]

Update from 5.1.79 went well without issue apart from my SMB was switched off and was reset to default

[Gandalf1369]

Update from 5.1.95 to 5.1.103. Went very smoothly. So far no issues. Will continue to monitor.

[Optimus22Prime]

Hello, I have some not critical bugs. I'm using TNAS U8-722-2224, and can't see model name and correct sensors data at "Network\General" and "System Info\Overview" tabs inside "Control Panel". "Model" field are blank, CPU temp sensor irrelevant (I definitely not have -1 degree Celsius inside servers room), HDD temp sensor chaotically chow different HDD every time when I open tab, and fan speed always show 0 RPM. Screens are added. Can all this be fixed, please?

Screenshot_20231207_120530-1.png

Screenshot_20231207_120722-1.png

[crisisacting]

… using TNAS U8-722-2224

Unless you were prompted by your TNAS to update, this manual update doesn't include your series of devices in its release notes.

[Optimus22Prime]

Terramaster newer include U series model inside supported model list, dunno why. For example 5.1.95 release notes also not mention U series, and previous updates too. But they are available at the official software download page https://support.terra-master.com/download for my NAS model. I'm asking about this once, and they are answered that x86 update are common for all x86 based TNAS models.

[Gremlin]

I have not seen it mentioned anywhere "official", but HD temp always used to be HD1. I think they have modified it to show hottest HD at the time. Mine shows (eg) HD5 which is the biggest/noisiest/fastest HD in the cabinet!

[TMLyy]

{L_BUTTON_AT}Optimus22Prime

Did you follow the update instructions on the official website? From what version was updated to 5.1.103? None of your hardware information shows the device temperature.

[Optimus22Prime]

Did you follow the update instructions on the official website?

Yes I did. This is not my first update. And indeed I have 8gb system partition, because I did clear 5.1.XX OS installation inside clean TNAS box when we just bought hardware, and I was been aware about 8gb and installation procedure. And indeed I checked results after. So

Code: Select all

Device                                                 Start                            End                        Sectors                       Size Type
/dev/sda1                                               2048                         585727                         583680                       285M Linux filesystem                     
/dev/sda2                                             585728                       16586751                       16001024                       7.6G Linux filesystem
/dev/sda3                                           16586752                       20586495                        3999744                       1.9G Linux filesystem
/dev/sda4                                           20586496                    35156654039                    35136067544                      16.4T Linux filesystem
Free space                                       35156654080                    35156656094                           2015                    1007.5K

From what version was updated to 5.1.103?

From 5.1.95

None of your hardware information shows the device temperature.

That's why I'm asking for. And it's never was, same as device model and fan RPM, starting from 5.1.24, which I installed to the freshly purchased clean device. I'm just not asking before...

[Gremlin]

{L_BUTTON_AT}Optimus22Prime

So this has nothing to do with the current update, under which you posted?