Is there any description, how to use the console port on my T9-450? Is this standard Cisco serial port with RJ45 or anything else? Which settings needs the terminal program?
Thomas
How to use console port
Re: How to use console port
Google has found a result from this forum, but the link is dead. Where can i find it again or why it has been deleted
viewtopic.php?f=82&p=27286
Thomas
viewtopic.php?f=82&p=27286
Thomas
- Attachments
-
- tm_console_link.png (18.9 KiB) Viewed 6874 times
main: T9-450
Re: How to use console port
The console port now is not ready for use, please wait for future TOS update to support this feature.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: How to use console port
I gave me a try with a standard cisco console cable and found it working fine. (115200,8N1 VT100) This way i was able to find my boot error after the 5.1.37 update and had access to the system bios to change the boot order.
Thomas
Thomas
main: T9-450
Re: How to use console port
Yes, currently this console port only works in the BIOS state, once TOS starts, this interface will not work.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: How to use console port
Yep, this is true, after "Booting from Raid" message are no further messages
main: T9-450