Page 1 of 1
[Help] My D4-300 in not recognized by my windows installation
Posted: 03 Aug 2025, 01:31
by Vtechlg
My D4-300 in not recognized by my windows installation, all the light are fine, if i plug it to my mac it work perfectly, currently when plugged into my windows installation it thinks that its a RAID controller and also show a Unkown USB Device (Set Address Failed) in the device manager.
Re: [Help] My D4-300 in not recognized by my windows installation
Posted: 03 Aug 2025, 01:34
by Vtechlg
It was working just fine prior to a failed windows update.
Re: [Help] My D4-300 in not recognized by my windows installation
Posted: 03 Aug 2025, 19:54
by TMbuddy
Hello! Your device works fine on Mac, so the device itself is normal. Consider other factors. What file system format are you using on Mac? It might be using a format that Windows doesn't support. If you're using a Windows-supported file system format, maybe it's a connection issue.
Please try changing USB ports, replacing the USB cable; try backing up data and reinitializing to see if it reads normally; update USB drivers.