Page 1 of 1

Reboot after new OS install

Posted: 19 Jan 2025, 23:27
by spoiler
On my T12-423 I've removed the TOS flash drive and installed Ubuntu 24.04 onto a Seagate Iron Wolf drive. Following the install the system powers off and resets itself once the BIOS screen has closed. The system just loops at this point. Reboot -> BIOS -> Reboot -> BIOS -> Reboot.

Looking into the BIOS itself I can see that the UEFI Hard Disk Drive BBS Priorities are all marked as Disable:

Boot Option #1 Disable
Boot Option #2 Disable

I can manually set them to the new Ubuntu boot disk and, if I do that, the system will start fine. Next reboot, Boom! They've all been set to Disable again. It's like something it wiping them out but I have no idea what that could be.

How do I get the system to keep the Boot Options?

Re: Reboot after new OS install

Posted: 20 Jan 2025, 23:05
by TMnick
You can try turning off TOS first boot. If the issue persists, please contact us.

Re: Reboot after new OS install

Posted: 20 Jan 2025, 23:34
by spoiler
Yeah, that has been turned off. Do I need to drop an email to support now or are there any other suggestions?

Re: Reboot after new OS install

Posted: 21 Jan 2025, 01:05
by spoiler
Actually, I think this thread viewtopic.php?t=4238) might have fixed my problem. Updating the BIOS might have done the trick.

Which is good because I might have hosed the little TOS flash drive. Is there a thread on how to fix that?

Re: Reboot after new OS install

Posted: 21 Jan 2025, 17:41
by crisisacting
spoiler wrote: 21 Jan 2025, 01:05… might have hosed the little TOS flash drive. Is there a thread on how to fix that?
As long as it's a ×86/×64 TNAS, it's @ viewtopic.php?t=6433

Re: Reboot after new OS install

Posted: 22 Jan 2025, 01:12
by spoiler
Awesome! Thanks.