After unplugging the hard disk for the initial installation of the TOS system, the TOS system cannot be started?
Posted: 14 Jul 2023, 18:32
Applicable Model:
F2-220, F2-420, F4-220, F4-420, F5-420, F2-221, F2-421, F2-422, F4-221, F4-421, F4-422, F5-221, F5- 421, F5-422, F8-421, F8-422, F2-423, F4-423, T6-423, T9-423, T12-423, T9-450, U4-423, U8-423, U8-450, U12-423
Applicable version:
TOS 5.1.40
Symptoms:
Unplug the hard disk that initially installed the TOS system in the TNAS device, and only keep the hard disk added later in the device. Then turn it on, the network indicator of the TNAS device is off, only the power indicator is on, and it cannot be searched through the TNAS PC client.
For example, use a SATA hard disk or M.2 SSD to install the TOS system, and then insert other hard disks, create storage pools and volumes in the TOS control panel, and then shut down and unplug the hard disk inserted during system installation.
Cause Analysis:
The TOS 5.1.40 version has adjusted the TOS system disk, and the hard disk that has not participated in the initial installation system does not have the TOS system. For the system before TOS5.1.40, the hard disk added after installing the TOS system has system information.
Solution:
Do not unplug the system disk of TOS to use.
F2-220, F2-420, F4-220, F4-420, F5-420, F2-221, F2-421, F2-422, F4-221, F4-421, F4-422, F5-221, F5- 421, F5-422, F8-421, F8-422, F2-423, F4-423, T6-423, T9-423, T12-423, T9-450, U4-423, U8-423, U8-450, U12-423
Applicable version:
TOS 5.1.40
Symptoms:
Unplug the hard disk that initially installed the TOS system in the TNAS device, and only keep the hard disk added later in the device. Then turn it on, the network indicator of the TNAS device is off, only the power indicator is on, and it cannot be searched through the TNAS PC client.
For example, use a SATA hard disk or M.2 SSD to install the TOS system, and then insert other hard disks, create storage pools and volumes in the TOS control panel, and then shut down and unplug the hard disk inserted during system installation.
Cause Analysis:
The TOS 5.1.40 version has adjusted the TOS system disk, and the hard disk that has not participated in the initial installation system does not have the TOS system. For the system before TOS5.1.40, the hard disk added after installing the TOS system has system information.
Solution:
Do not unplug the system disk of TOS to use.