Page 1 of 1
How to use console port
Posted: 25 May 2023, 01:06
by tommi2day
Is there any description, how to use the console port on my T9-450? Is this standard Cisco serial port with RJ45 or anything else? Which settings needs the terminal program?
Thomas
Re: How to use console port
Posted: 28 May 2023, 15:58
by tommi2day
Google has found a result from this forum, but the link is dead. Where can i find it again or why it has been deleted
viewtopic.php?f=82&p=27286
Thomas
Re: How to use console port
Posted: 28 May 2023, 22:22
by TMroy
The console port now is not ready for use, please wait for future TOS update to support this feature.
Re: How to use console port
Posted: 29 May 2023, 19:32
by tommi2day
I gave me a try with a standard cisco console cable and found it working fine. (115200,8N1 VT100) This way i was able to find my boot error after the 5.1.37 update and had access to the system bios to change the boot order.
Thomas
Re: How to use console port
Posted: 29 May 2023, 21:36
by TMroy
Yes, currently this console port only works in the BIOS state, once TOS starts, this interface will not work.
Re: How to use console port
Posted: 30 May 2023, 00:38
by tommi2day
Yep, this is true, after "Booting from Raid" message are no further messages