TerraMaster Forum

Target Users:
Users currently running TOS 7.0.0746 or later versions.

Note:
If your TOS version is TOS 6, please refer to the TOS 7 update instructions first.
Important: This update is only applicable to TOS 7.0.0746 and newer. Users with older versions must first update to 7.0.0746 before applying this update.

Here, we sincerely thank @nitzer71, @DCCentR, @snapsh0t, @Lex, @crisisacting, @Pe6yc, @rfbjr, @sianderson, @mab, @Nitrokalel, @kkay1961, @apvm, @storageninja, @Gremlin and others for your sharing and feedback. Your support helped us quickly identify and fix multiple issues.

Release Notes:
This update adopts a phased gray release strategy to ensure stability across different device models and network environments.
Phase 1 (Starting Today): The manual update package is now available for download on our forum. It will be rolled out in batches based on system version, device model, and region.
Phase 2 (In One Week): The full online push will officially begin. At that time, all users will receive an update notification and can complete the update by following the on-screen prompts.

Update Notes
Bug Fixes:
1. Fixed the issue where excessively long file names caused global search to continuously occupy CPU resources.
2. Fixed the issue where SMB advanced settings could not be properly configured in some scenarios.
3. Fixed the issue where the page might incorrectly prompt a failure when migrating shared folders.
4. Fixed the issue where the database usage of file task records for copy and move operations was not detected in a timely manner.
5. Fixed the issue where a single paused copy file task could not be canceled.
6. Fixed the issue where uploading large files might fail.
7. Fixed the issue where, after restarting the App Center service, if the service had not fully loaded, quickly clicking on app navigation might occasionally cause a jump error.
8. Fixed the issue where, after manually installing an app, the automatically created shared folder path for some apps did not match the app installation volume.
9. Fixed other known issues.

Important Information:
1.Updating the system theoretically will not affect the data on your hard drives, but for safety, please make sure to back up your data in advance.
2.Before updating, ensure that your primary volume (usually volume1) has at least 3GB of available space. Insufficient storage space may cause the update to fail.
3.After the update, the IP address of your TNAS may change. Please use the TNAS PC desktop client to search for and reconnect to the device.

Update Procedure:
1.Download TOS 7.0.1140 update package (MD5: 242f78f97e7457a203b945d42843a7cd);
2.Go to TOS > Control Panel > General Settings > System > Update;
3.Select "Manual Update" and upload the downloaded update package file;
4.Follow the prompts to complete the update;
5.After the system update is complete, please refresh your browser;
6.The TNAS IP address may change after the update. If you cannot connect to your TNAS using the previous IP address, use the TNAS PC client to search for the new IP address;

Client Downloads:
1. Download TNAS PC 5.2.548 for Windows OS.
- MD5: 72701b52336af9fd8b97a6be9d5d5a7c
2. Download TNAS PC 5.2.548 for macOS (x86 architecture).
- MD5: baa63a179c43f73965ea9c31eeb9d61e
3. Download TNAS PC 5.2.548 for macOS (ARM architecture).
- MD5: bb933da867058884c4adfe44ead24afc
4. Download TNAS PC 5.2.548 for Linux.
- MD5: 06fe93f9ffe47147854a34f28d57fcc2
5. TNAS mobile for Android: Please search for "TNAS mobile" in the app store to install.
6. TNAS Mobile for iOS: Please search for "TNAS mobile" in the App Store to install.

Since the NTP issue isn't explicitly mentioned in the notes, will wait for others to install & comment, before updating.

I have updated my TNAS to TOS 7.0.1140.

The NTP configuration is currently:
The `prefer` option is no longer present.

NTP is now correctly selecting an external server instead of LOCAL(0):
LOCAL(0) is no longer selected:
The external NTP servers are reachable and the selected server has reach 377.

However, because I had previously removed `prefer` manually, I cannot yet determine whether TOS 7.0.1140 itself contains the NTP fix or whether it simply preserved my modified configuration.

Could you please confirm whether the NTP configuration in TOS 7.0.1140 has been changed to remove `prefer` from LOCAL(0), and whether this issue has now been officially fixed?

Thank you.

nitzer71 wrote: ↑18 Aug 2026, 13:28

Thank you for your detailed testing.The fix to remove the `prefer` flag for LOCAL(0) is not included in TOS 7.0.1140.This issue will be fixed in the next TOS release.

update successful. The login page loaded immediately

Thank you

Looks like this one fixed - viewtopic.php?p=58488#p58488
At least on first boot after update

P.S. Second boot also OK

I have 7.0.1130 version. And write "Current system is the latest version"

Lex wrote: ↑18 Aug 2026, 15:30 I have 7.0.1130 version. And write "Current system is the latest version"

This update is applied via a manual update, look at "Update Procedure"

DCCentR wrote: ↑18 Aug 2026, 15:31

Спасибо. Не обратил внимания

The directory continues to be created /"usr/static/images/file_manager