TerraMaster Forum

For those with F4-424 Pro and the errors:

pcieport 0000:00:1c.6: AER: Correctable error message received from 0000:00:1c.6

I've managed to silence them by running this command:

printf '\x01\x20\x00\x00' | dd of=/sys/bus/pci/devices/0000:00:1c.6/config bs=1 seek=$((0x114)) count=4 2>/dev/null

This is only a temporary solution and will be gone after a system reboot.

Interesting enough, more newer F4-424 Pro doesn't seem to be affected. (Maybe older models need a ASM1062 firmware upgrade?)

Thank you for your sharing. This could be a compatibility issue between the hardware and its drivers. We are conducting an in-depth investigation and will follow up on this issue.

Hello!
There is a problem with virtual machines.
In short: it is impossible to work.
Video link.
This is a regular mp4 file uploaded to Google Drive
https://drive.google.com/file/d/10mKNAX ... sp=sharing

Updated to TOS 7. F6-424. All went well.
So far is a nice update.
I have a request for future feature. Could you please reinstate the option in updates to not apply them automatically? Just nice to have a bit of control.

Hello.

I have an F4-423 and want to manually update from TOS 6.0.794 to TOS 7.0.0747. Currently, the OS is installed on an NVMe SSD. There are also 4 HDDs in a TRAID array containing media data. Do I need to remove these 4 HDDs containing the media data for the TOS 7.0.0747 installation so that only the NVMe SSD is available as the installation target? Or must all drives remain inside the TNAS during the installation process? I have no way to back up all the media data from the 4 HDDs externally, and I am worried about losing that data.

You need to follow this guide:
viewtopic.php?t=9417

Gremlin wrote: ↑18 minutes ago You need to follow this guide:
viewtopic.php?t=9417

Already done. BIOS version is: T1509BG0. Adjusted boot order: 1. HDD, 2. NVMe, 3. USB.

My question is: do all 4 HDDs need to remain inside the TNAS during installation process if the OS is being installed on the NVMe?