TerraMaster Forum

Reminder wrote: ↑06 Dec 2025, 21:31
Within system / harddisk overview I found several partitions on the SSD:

Those numbers are normal.

- sdza1 - VFAT - 285M (seems to be the system itself): BOOTLOADER
- sdza2 - "RAID-Member without independent Data-System" (translated by myself) - 7,6G: OPERATING SYSTEM
- sdza3 - "RAID-Member without independent Data-System" (translated by myself) - 1,9G: SWAP
- sdza4 - "RAID-Member without independent Data-System" (translated by myself) - 455,8G !!!!!: DATA (ie a VOLUME)

- sdza4 - "RAID-Member without independent Data-System" (translated by myself) - 455,8G !!!!!: DATA (ie a VOLUME)

There is no Volume or Data placed by myself. These SSDs are ONLY for System. And that enormous amount of Data that filled the SSD to 100% occurred only after the system update to 6.0.794 (from 6.0.783).

So the questions are: how to delete that data, how to access the partiton? And additional: how to avoid that problem in the future?

Reminder wrote: ↑08 Dec 2025, 19:59

- sdza4 - "RAID-Member without independent Data-System" (translated by myself) - 455,8G !!!!!: DATA (ie a VOLUME)

There is no Volume or Data placed by myself. These SSDs are ONLY for System. And that enormous amount of Data that filled the SSD to 100% occurred only after the system update to 6.0.794 (from 6.0.783).

So the questions are: how to delete that data, how to access the partiton? And additional: how to avoid that problem in the future?

Please generate and download the log report in TOS > Technical Support > Issue Report, then send it to our technical support email ([email protected]). We will analyze it.

While I said "Data" maybe I should have said "space allocated for data". It does not need to have actual data in that space. The 455.8GB is the partition size which can be which can allocated to 1 or more Volumes, (shared) folders are generated maybe by user or system and then data is placed on them. Sometimes apps are installed here (at the choice of the admin-user) and sometimes things like snapshots are stored here.

There is a bug, when i'm connected on my Cyberghost VPN my IP WAN disappear on the right control panel and appear if i deactivate it !

Polo wrote: ↑09 Dec 2025, 19:32 There is a bug, when i'm connected on my Cyberghost VPN my IP WAN disappear on the right control panel and appear if i deactivate it !

Hello, we have noticed this issue and it will be fixed in the next version.

At first glance, everything seems to be working fine on an F6-424

Help! F2-423. I updated from 770 to 783. Saw another update and updated to 794.

Now I can't access it via local IP. I can ping it. I used TNAS mobile to detect it and it shows uninitialized. Clicking in, it shows a page that TNAS initalization is starting soon.

I have data in my current disks. Is there any way to restore?

wilson wrote: ↑16 Dec 2025, 21:13

It seems the last startup did not successfully launch TOS. You can try restarting multiple times to see if that helps. Also, check if there is a disk that is not securely installed in its slot.
If the problem persists, you may consider resetting the system. (Please note not to select a disk that was previously used as an SSD Hyper Cache as the target for system installation.)
It is recommended that you check the disk.

I'm trying to update version from 6.0.770 to 6.0.794. After the message "unzipping, wait" nothing happens. What can be done?

The update was successful on the second try.