TerraMaster Forum

outkastm wrote: ↑06 Jan 2025, 03:40

ajkaramba wrote: ↑04 Jan 2025, 23:13

can you run these commands in terminal and send the results ?

Code: Select all

ldd /usr/lib/x86_64-linux-gnu/intel-opencl/libigdrcl.so
ldd /usr/lib/x86_64-linux-gnu/libopencl-clang.so.12

Root@TNAS:/# ldd /usr/lib/x86_64-linux-gnu/intel-opencl/libigdrcl.so
linux-vdso.so.1 (0x00007ffeaa9f6000)
libigdgmm.so.12 => /lib/x86_64-linux-gnu/libigdgmm.so.12 (0x000014ff276c3000)
libstdc++.so.6 => /lib/x86_64-linux-gnu/libstdc++.so.6 (0x000014ff26800000)
libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x000014ff26b19000)
libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x000014ff276a3000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x000014ff26400000)
/lib64/ld-linux-x86-64.so.2 (0x000014ff27755000)

Root@TNAS:/# ldd /usr/lib/x86_64-linux-gnu/libopencl-clang.so.12
linux-vdso.so.1 (0x00007ffc509ab000)
libLLVMSPIRVLib.so.12 => /lib/x86_64-linux-gnu/libLLVMSPIRVLib.so.12 (0x00001530d8000000)
libclang-cpp.so.12 => /lib/x86_64-linux-gnu/libclang-cpp.so.12 (0x00001530d5200000)
libLLVM-12.so.1 => /lib/x86_64-linux-gnu/libLLVM-12.so.1 (0x00001530cf600000)
libstdc++.so.6 => /lib/x86_64-linux-gnu/libstdc++.so.6 (0x00001530cf200000)
libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00001530d8328000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00001530cee00000)
/lib64/ld-linux-x86-64.so.2 (0x00001530d8443000)
libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00001530cf519000)
libffi.so.8 => /lib/x86_64-linux-gnu/libffi.so.8 (0x00001530d8319000)
libedit.so.2 => /lib/x86_64-linux-gnu/libedit.so.2 (0x00001530d82df000)
libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00001530d7fe4000)
libtinfo.so.6 => /lib/x86_64-linux-gnu/libtinfo.so.6 (0x00001530d7fb2000)
libxml2.so.2 => /lib/x86_64-linux-gnu/libxml2.so.2 (0x00001530cec1e000)
libbsd.so.0 => /lib/x86_64-linux-gnu/libbsd.so.0 (0x00001530d7f9a000)
libicuuc.so.70 => /lib/x86_64-linux-gnu/libicuuc.so.70 (0x00001530cea23000)
liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00001530d7f6f000)
libmd.so.0 => /lib/x86_64-linux-gnu/libmd.so.0 (0x00001530d51f3000)
libicudata.so.70 => /lib/x86_64-linux-gnu/libicudata.so.70 (0x00001530cce00000)

I am having the same issue as @ajkaramba with Jellyfin 10.10.3.2. I can't play any HEVC HDR movies with Intel QSV + Tone mapping enabled. However, switching to VAAPI + VAPP Tone mapping works. This issue has been discussed in Github (https://github.com/jellyfin/jellyfin-we ... nt-3716390).

I still have to figure out why OpenCL is not loading on your side.

Here on my F4-423:

QSV + Tone mapping have better colors (but take more power when Tone mapping is enabled)



VAAPI + VPP Tone Mapping

10.10.3.3 is out, this should fix QSV + Tone Mappping
Restart of the NAS is not needed (unless you see this message in start_log file)

Thank you so much for your work! Everything is working perfectly now

outkastm wrote: ↑07 Jan 2025, 06:20 10.10.3.3 is out, this should fix QSV + Tone Mappping
Restart of the NAS is not needed (unless you see this message in start_log file)

Thanks, it's fully working as intended now. What was the issue?

Can we expect 10.10.3.3 version for TOS5?

These minor versions were to enable Tone Mapping. It works with newer CPU's from NAS models that support TOS6. I will not release this for TOS5. Jeelyfin will continue to be released for TOS5. For now...

When jellyfin 10.10.2.0 for F4-212 (ARM)?
I need also ffmpeg51 (ARM).

Hello,

I have tried many ways to try to make Jellyfin to work Transcoding without success.

My device is: F2-423 -> TOS 6.0.577-00166

I've installed:
- Modbase1 ver: 1.00.21
- FFMpeg ver: 4.4.3.3 (iHD driver is enabled)
- FFMpeg51 ver: 5.1.3.2 (iHD driver is enabled)
- Jellyfin installed version is 10.10.3.0


Output FFmpeg.Transcode error:

--- IF I USE VAAPI---
Device creation failed: -542398533.
[hevc @ 0x21f09c0] No device available for decoder: device type vaapi needed for codec hevc.
Stream mapping:
Stream #0:0 -> #0:0 (hevc (native) -> h264 (h264_vaapi))
Stream #0:1 -> #0:1 (aac (native) -> aac (native))
Device setup failed for decoder on input stream #0:0 : Generic error in an external library

--- IF I USE QSV ---
Device creation failed: -542398533.
Failed to set value 'vaapi=va:,kernel_driver=i915,driver=iHD' for option 'init_hw_device': Generic error in an external library
Error parsing global options: Generic error in an external library


Any idea what I'm doing wrong?