TerraMaster Forum

Data scrubbing on btrfs TRAID volumes doesn't work on .131. It's crazy that TOS's flagship RAID configuration and recommended filesystem (btrfs) doesn't support one of the key tools for protecting and maintaining data integrity.

Also, I secure wiped my drives only to find after re-installing TOS that all the data was still there. Incredible.

crisisacting wrote: ↑19 May 2024, 07:31

May I ask if there are any other processes occupying the volume when configuring SSD? You can check through the following link:
viewtopic.php?t=5955

May I ask if compatibility issues have been checked? Compatibility list:
https://www.terra-master.com/global/compatibility/

TMqiky wrote: ↑19 May 2024, 15:41 May I ask if compatibility issues have been checked? Compatibility list:
https://www.terra-master.com/global/compatibility/

It's compatible; the drive was used as the SSD cache on TOS 4.× builds; it was secure erased prior to trying to add it & has been repeatedly between attempts to add Hypercache .

Haven't been able to get any TOS 5.1.1×× builds to add a cache since doing a clean install.

Have already been getting complaints about delayed read.

TMRyan wrote: ↑07 May 2024, 10:37

Hi, after this update (from version 5.1.123) I noticed that port 80 (and also 443) is always used by process "nasips".
Before the update I used WebServer with port 80 and it worked fine.
Could you kindly check if something is changed and how I can use port 80 in WebServer?

I need to use this specific port to do the "SSL certificate renew challenge" from Let's Encrypt.
I already tried to reboot NAS but I have the same problem.

Thanks!

brunix86 wrote: ↑01 Jun 2024, 17:09

We will verify this.
You can open Control Panel - Network - General again and release port 80/443. Then you can use it for your WebServer.

TMzethar wrote: ↑01 Jun 2024, 18:41

Hi, using the option you mentioned "Release ports 80 and 443" worked fine!
But I'm sure that the option was already checked before update to 5.1.131.
I think the update unchecked\disabled the option.

Thanks!

After this: viewtopic.php?t=6232 (Post power fail re-install)

Email Notifications failed and needed to be reset.

Is there any guide to update from 5.1.131 to TOS6?

viewtopic.php?p=36580#p36580

Read ALL the notes first, since I don't know what model you have and what your start point was.

zonatar wrote: ↑13 Nov 2024, 02:38 Is there any guide to update from 5.1.131 to TOS6?

You can refer to the upgrade path in the following link to upgrade your TOS.


viewtopic.php?t=6984