Data scrubbing on btrfs TRAID volumes doesn't work on .131. It's crazy that TOS's flagship RAID configuration and recommended filesystem (btrfs) doesn't support one of the key tools for protecting and maintaining data integrity.
Also, I secure wiped my drives only to find after re-installing TOS that all the data was still there. Incredible.
TOS 5.1.131 (X86) is Released for Update
- DigitalAnalog
- Posts: 74
- Joined: 22 Mar 2024, 07:07

Re: TOS 5.1.131 (X86) is Released for Update
May I ask if there are any other processes occupying the volume when configuring SSD? You can check through the following link:
viewtopic.php?t=5955
May I ask if compatibility issues have been checked? Compatibility list:
https://www.terra-master.com/global/compatibility/
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
- crisisacting
- Silver Member
- Posts: 500
- Joined: 20 Jan 2022, 16:42
Re: TOS 5.1.131 (X86) is Released for Update
It's compatible; the drive was used as the SSD cache on TOS 4.× builds; it was secure erased prior to trying to add it & has been repeatedly between attempts to add Hypercache .TMqiky wrote: ↑19 May 2024, 15:41 May I ask if compatibility issues have been checked? Compatibility list:
https://www.terra-master.com/global/compatibility/
Haven't been able to get any TOS 5.1.1×× builds to add a cache since doing a clean install.
Have already been getting complaints about delayed read.
Re: TOS 5.1.131 (X86) is Released for Update
Hi, after this update (from version 5.1.123) I noticed that port 80 (and also 443) is always used by process "nasips".
Before the update I used WebServer with port 80 and it worked fine.
Could you kindly check if something is changed and how I can use port 80 in WebServer?
I need to use this specific port to do the "SSL certificate renew challenge" from Let's Encrypt.
I already tried to reboot NAS but I have the same problem.
Thanks!
My NAS Environment
- TNAS F4-424
- TOS 7.0.0777 (8GB System Partition)
- 1x RAM Terramaster 8GB DDR5 4800 MHZ
- 2x HDD WD RED PLUS 4TB CMR [RAID1]
- 2x HDD Seagate IronWolf 12TB CMR [RAID1]
- UPS Tecnoware ERA PLUS 1100 [770 W]
Re: TOS 5.1.131 (X86) is Released for Update
We will verify this.
You can open Control Panel - Network - General again and release port 80/443. Then you can use it for your WebServer.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: TOS 5.1.131 (X86) is Released for Update
Hi, using the option you mentioned "Release ports 80 and 443" worked fine!
But I'm sure that the option was already checked before update to 5.1.131.
I think the update unchecked\disabled the option.
Thanks!
My NAS Environment
- TNAS F4-424
- TOS 7.0.0777 (8GB System Partition)
- 1x RAM Terramaster 8GB DDR5 4800 MHZ
- 2x HDD WD RED PLUS 4TB CMR [RAID1]
- 2x HDD Seagate IronWolf 12TB CMR [RAID1]
- UPS Tecnoware ERA PLUS 1100 [770 W]
Re: TOS 5.1.131 (X86) is Released for Update
After this: viewtopic.php?t=6232 (Post power fail re-install)
Email Notifications failed and needed to be reset.
Email Notifications failed and needed to be reset.
F5-221 TOS7.0.0777 - 4x4TB (Ironwolf) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
Re: TOS 5.1.131 (X86) is Released for Update
Is there any guide to update from 5.1.131 to TOS6?
Re: TOS 5.1.131 (X86) is Released for Update
viewtopic.php?p=36580#p36580
Read ALL the notes first, since I don't know what model you have and what your start point was.
Read ALL the notes first, since I don't know what model you have and what your start point was.
F5-221 TOS7.0.0777 - 4x4TB (Ironwolf) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
Re: TOS 5.1.131 (X86) is Released for Update
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)

