TOS 5.1.95 (X86) is Released for Update

[Alessio71]

Just updated to 5.1.95 on F2-221. Skipped .79. No issues with date format.

Confirm, no date issue anymore

[topo01]

Not good!

In TOS 5.1.67 it didn't recognise the new updates so I had to manually update to 5.1.95.
After reboot I got a white screen "Loading.... Please wait" for more than 6 hours!
Can please someone tell me what the system was doing during that time? It really worried me an there was no other message.

Then I updated Docker from 1.2.8 to 1.2.9 which made it disappear from the desktop. Strangely it took another hour or so until the "Send to desktop" button re-appeared...

[joka388]

Clean install on F2-221 an the SMB Speed still drops to 21 Mb/s
No Problems with 4.2.40, i dont understand why.
That's it for me with TerraMaster

[Gremlin]

{L_BUTTON_AT}joka388

Have you tried disabling scheduled power on/off?

[TMzethar]

{L_BUTTON_AT}topo01

If you have a large number of files, it is likely due to automatic detection and repair of the file system. It cannot be ruled out that there may be other influential anomalies. But it should be unrelated to the update. Will you still encounter this situation after restarting TNAS?

[joka388]

{L_BUTTON_AT}joka388

Have you tried disabling scheduled power on/off?

If no start times are selected after the initial installation, the SMB speed is normal at 113 Mb/s. But as soon as the start times have been selected, switching them off no longer helps - the SMB speed remains at 21 Mb/s

[Gremlin]

If no start times are selected after the initial installation, the SMB speed is normal at 113 Mb/s. But as soon as the start times have been selected, switching them off no longer helps - the SMB speed remains at 21 Mb/s

Delete schedules as well. (This worked on earlier versions. I found I did not need to do this on later, but you never know). @TMsupport = apparently still an issue.

[topo01]

{L_BUTTON_AT}TMzethar

Yes, after the second restart it also took about an hour before I could log in.
I have a fairly fresh setup as I did a clean install just in July based on 5.1.41 (with 8GB system partition). I'm mainly running a few shares and Docker/Nextcloud for some syncing. Only recently I installed Terra Photos and activated media scanning. My 2TB RAID is only 33% filled, mostly with photos.

[joka388]

If no start times are selected after the initial installation, the SMB speed is normal at 113 Mb/s. But as soon as the start times have been selected, switching them off no longer helps - the SMB speed remains at 21 Mb/s

Delete schedules as well. (This worked on earlier versions. I found I did not need to do this on later, but you never know). @TMsupport = apparently still an issue.

Thx for the TIP, it works. Deleting of the schedules than restart an the SMB Speed ist at 113 Mb/s.
Very strange

[TMzethar]

{L_BUTTON_AT}joka388

We will verify the issue you mentioned.