Page 2 of 10
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 15 Jan 2025, 18:56
by fordrwd4ever
The manual installation did work , but took really long... (almost an hour..)
Still strange that the auto update cannot extract the bz2 file
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 15 Jan 2025, 19:23
by DekkaR
TMRyan wrote: ↑15 Jan 2025, 17:47
DekkaR wrote: ↑15 Jan 2025, 17:19
"3. Optimized the display effect that appears on the resource monitoring page."
¿Only LOAD AVERAGE and LOAD DETAILS?
And:
- CPU??
- Memory??
- Disk I/O??
- Network I/O??
Why a partial solution and not a complete solution?
Changed the coordinate values displayed in the image to start at 0.
"3. Optimized the display effect"
Effectively, the terrible redraw effect has been corrected in the first two graphs, but not in the others. The data graph should "move," not be constantly redrawn.
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 15 Jan 2025, 19:26
by rfbjr
So far so good on F2/F4-223. LUNs working and file shares. More testing continues later. (after more coffee)
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 15 Jan 2025, 19:52
by CraftyClown
fordrwd4ever wrote: ↑15 Jan 2025, 18:56
The manual installation did work , but took really long... (almost an hour..)
Still strange that the auto update cannot extract the bz2 file
Can I ask where you found a version to manually download?
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 15 Jan 2025, 21:04
by fordrwd4ever
CraftyClown wrote: ↑15 Jan 2025, 19:52
fordrwd4ever wrote: ↑15 Jan 2025, 18:56
The manual installation did work , but took really long... (almost an hour..)
Still strange that the auto update cannot extract the bz2 file
Can I ask where you found a version to manually download?
After teh automatsc download ,you can find it in the root of your data drive , in my case it was in /Volume2/.(long name with random characters)
Unpacked it with 7-zip , then extracted it again (its a tar file) to a temp folder.
In the temp folder , just run ./install and wait for a really long time....
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 15 Jan 2025, 21:29
by TMlinda
Are you updating via SSH connection terminal? If so, it may cause the installation to be interrupted. It is recommended that you perform the update operation on the TOS system page.
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 15 Jan 2025, 21:45
by fordrwd4ever
No , i did it via the Terminal app, as via the gui it just isn't working at all.
It looks like the archive is just not packed properly.
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 15 Jan 2025, 23:24
by CraftyClown
fordrwd4ever wrote: ↑15 Jan 2025, 21:04
CraftyClown wrote: ↑15 Jan 2025, 19:52
fordrwd4ever wrote: ↑15 Jan 2025, 18:56
The manual installation did work , but took really long... (almost an hour..)
Still strange that the auto update cannot extract the bz2 file
Can I ask where you found a version to manually download?
After teh automatsc download ,you can find it in the root of your data drive , in my case it was in /Volume2/.(long name with random characters)
Unpacked it with 7-zip , then extracted it again (its a tar file) to a temp folder.
In the temp folder , just run ./install and wait for a really long time....
Thanks, I'll give that a try
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 16 Jan 2025, 00:43
by Bartman
CraftyClown wrote: ↑15 Jan 2025, 18:13
also can I get a manual download of this for one of my devices? I have an issue with the WAN not working on my F4-423 that I'm hoping will be fixed with this release
viewtopic.php?p=42325#p42325
Have you tried this page, it sorted me out with no WAN
viewtopic.php?t=5939
Regards
Re: TOS 6.0.610 (X86) is Released for Update
Posted: 16 Jan 2025, 00:45
by Bartman
For me, the mobile app dials, heat, load, CPU, Memory and fan stats have stopped working, this happened before with an update, then got fixed with the next, so I take it we will have to wait for the next update to either fix or break it again.
Regards