Page 2 of 12

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 14 Nov 2024, 23:28
by bugacha
Bartman wrote: 14 Nov 2024, 22:46 It's always been 9222 as far as I have known.

Regards
I guess it ignored my override

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 15 Nov 2024, 00:37
by Gremlin
bugacha wrote: 14 Nov 2024, 23:28
Bartman wrote: 14 Nov 2024, 22:46 It's always been 9222 as far as I have known.

Regards
I guess it ignored my override
Probably because 22 is not secure port. (They are sort of obliged to protect the stupid who do things unknowingly.) ;)

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 15 Nov 2024, 02:42
by bugacha
Gremlin wrote: 15 Nov 2024, 00:37 Probably because 22 is not secure port. (They are sort of obliged to protect the stupid who do things unknowingly.) ;)
Integer value doesnt make a port secure. SSHD settings and Firewall do.

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 15 Nov 2024, 05:06
by rfbjr
F2-223, so far so good. Was watching the fan speed, after a few minutes it kicked in. :) F4-223 is next, that one has iSCSI running among other features.

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 15 Nov 2024, 06:03
by star
Gremlin wrote: 14 Nov 2024, 21:12
star wrote: 14 Nov 2024, 20:26 network port 2 is shifting ip adress nonstop every hour for unknown reason. despite being set to static. it jumps ip adress.
Is that shifting within the set lan segment? Shifting within the allocated DHCP pool? Is there a conflict between DHCP pool range and static setting on nas?
no it shifts to a completly diffrent subnet randomly each time.

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 15 Nov 2024, 06:32
by rfbjr
No issues on my F4-223, LUN's running without any issues, didn't need to re-enable anything.

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 15 Nov 2024, 06:50
by star
Two nases updated to this version and they no longer send local smtp notifications

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 15 Nov 2024, 09:23
by TMroy
star wrote: 14 Nov 2024, 20:26 network port 2 is shifting ip adress nonstop every hour for unknown reason. despite being set to static. it jumps ip adress.
Please enable the "Debug mode" and send us the log as soon as the issue happen again.

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 15 Nov 2024, 15:24
by star
TMroy wrote: 15 Nov 2024, 09:23
star wrote: 14 Nov 2024, 20:26 network port 2 is shifting ip adress nonstop every hour for unknown reason. despite being set to static. it jumps ip adress.
Please enable the "Debug mode" and send us the log as soon as the issue happen again.
I have now logged the error and i read the log and it shows why it happens for some reason it senses the link go down and then Registering new address record for 169.254.0.2 on eth1.IPv4.

despite being told to be static. wich is odd?

smtp local gave this error failed to sn.smtp.SendEmail(HandleSendEmail): remote error: tls: handshake failure

ive sent the entire log to the support mail

Re: TOS 6.0.535 (X86) is Released for Update

Posted: 15 Nov 2024, 17:18
by ellowsmile
After installing version 6.0.535 I can't find TNAS by local name, only by IP address