TerraMaster Forum

Looks like my D4-320 will not goto sleep, is it possible that I flash it back to 1278?

apvm wrote: ↑11 Oct 2026, 11:55

System downgrade is not supported.

Regarding the D4-320 sleep issue, DAS sleep mode is primarily determined by host disk I/O activity. Please check the following:

• Hard Drive Sleep Settings: Ensure that disk hibernation is enabled under Control Panel > Hardware & Power > Disk Sleep.

• Background Disk Activity: Check whether background tasks, services, or applications (such as media indexing, system logs, or containers) are actively reading or writing to the D4-320, as continuous I/O will prevent the drives from entering sleep mode.

Looking forward to your feedback!

EriChan wrote: ↑11 Oct 2026, 19:27

apvm wrote: ↑11 Oct 2026, 11:55

System downgrade is not supported.

Regarding the D4-320 sleep issue, DAS sleep mode is primarily determined by host disk I/O activity. Please check the following:

• Hard Drive Sleep Settings: Ensure that disk hibernation is enabled under Control Panel > Hardware & Power > Disk Sleep.

• Background Disk Activity: Check whether background tasks, services, or applications (such as media indexing, system logs, or containers) are actively reading or writing to the D4-320, as continuous I/O will prevent the drives from entering sleep mode.

Looking forward to your feedback!

Thanks, I turned the F4-424 off and turn it back on after 1 minute, both D4-320 sleep after 30 minutes, looks fine now. BTW, thanks for the about no turn back to 1278, I'll delete the file to avoid making mistake.

Both F5-221 and F2-221 updated from 7.0.1278 without any issues

What did happen with forum topics? I do not see recent topics in "Update Notice" channel. For example I see topic "TOS 7.0.1298 (x86) Official Release Update" on "Board index", I see there that it is a part of "Update Notice" channel. But when I go to "Update Notice" channel I do not see this topic. It is accessible for me via search and with direct link from "Board index" - but it is invisible inside "Update Notice". I see this behaviour for a few recent releases. The latest topic that I can see in "Update Notice" - "TOS 7.0.1105 (x86) Official Release Update".

update ok

How do I remove 541 gigabytes of junk? It accumulates after a firmware update.

ambul wrote: ↑Yesterday, 00:14

See if this helps: viewtopic.php?t=10672

Updated both my units no issues observed

Upgraded from 7.0.1114 (beta) to 7.0.1298 (official) using the manual option. Everything worked quickly and completely. Noticed that my resources numbers are much better, so perhaps things were reset. It's nice to be on the official release now.