Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 11 Jun 2026, 15:51
by Gremlin
Updated F2-425+. Noticed several segfault errors (from dmesg) like this:
Code: Select all
[ 12.913944] hub 3-0:1.0: 12 ports detected
[ 12.915316] iniparse[581]: segfault at 7fc78362b413 ip 00007fc78362b413 sp 00007fff7f9d0350 error 15 in iniparse[2bd413,7fc78336e000+2be000] likely on CPU 3 (cor
e 3, socket 0)
[ 12.915947] Code: ff d5 59 5e 5f 5d 6a 05 5a 6a 0a 58 0f 05 41 ff e5 5d e8 3c ff ff ff 2f 70 72 6f 63 2f 73 65 6c 66 2f 65 78 65 00 00 01 00 00 <e8> 4a 00 00 00
83 f9 49 75 44 53 57 48 8d 4c 37 fd 5e 56 5b eb 2f
[ 12.917711] iniparse[583]: segfault at 7f8c2f37c413 ip 00007f8c2f37c413 sp 00007ffdab44e600 error 15 in iniparse[2bd413,7f8c2f0bf000+2be000] likely on CPU 3 (cor
e 3, socket 0)
[ 12.918398] Code: ff d5 59 5e 5f 5d 6a 05 5a 6a 0a 58 0f 05 41 ff e5 5d e8 3c ff ff ff 2f 70 72 6f 63 2f 73 65 6c 66 2f 65 78 65 00 00 01 00 00 <e8> 4a 00 00 00
83 f9 49 75 44 53 57 48 8d 4c 37 fd 5e 56 5b eb 2f
[ 12.920214] iniparse[584]: segfault at 7fe5cb548413 ip 00007fe5cb548413 sp 00007ffe8f1c7080 error 15 in iniparse[2bd413,7fe5cb28b000+2be000] likely on CPU 3 (cor
e 3, socket 0)
[ 12.920937] Code: ff d5 59 5e 5f 5d 6a 05 5a 6a 0a 58 0f 05 41 ff e5 5d e8 3c ff ff ff 2f 70 72 6f 63 2f 73 65 6c 66 2f 65 78 65 00 00 01 00 00 <e8> 4a 00 00 00
83 f9 49 75 44 53 57 48 8d 4c 37 fd 5e 56 5b eb 2f
[ 12.931667] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 12.932056] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.932446] usb usb4: Product: xHCI Host Controller
[ 12.932817] usb usb4: Manufacturer: Linux 6.12.63+ xhci-hcd
[ 12.933192] usb usb4: SerialNumber: 0000:00:14.0
[ 12.942665] r8169 0000:03:00.0 eth1: RTL8126A, 6c:bf:b5:04:be:41, XID 64a, IRQ 151
[ 12.943051] r8169 0000:03:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 12.958471] hub 4-0:1.0: USB hub found
[ 12.958983] hub 4-0:1.0: 4 ports detected
[ 12.978323] iniparse[593]: segfault at 7f360aef6413 ip 00007f360aef6413 sp 00007ffc632c9ce0 error 15 in iniparse[2bd413,7f360ac39000+2be000] likely on CPU 1 (cor
e 1, socket 0)
[ 12.979176] Code: ff d5 59 5e 5f 5d 6a 05 5a 6a 0a 58 0f 05 41 ff e5 5d e8 3c ff ff ff 2f 70 72 6f 63 2f 73 65 6c 66 2f 65 78 65 00 00 01 00 00 <e8> 4a 00 00 00
83 f9 49 75 44 53 57 48 8d 4c 37 fd 5e 56 5b eb 2f
[ 12.981342] iniparse[594]: segfault at 7f1de9c51413 ip 00007f1de9c51413 sp 00007ffc6909e6c0 error 15 in iniparse[2bd413,7f1de9994000+2be000] likely on CPU 2 (cor
e 2, socket 0)
Initially I thought it might be associated with a known bad USB mounted hdd (forgot to remove it before it auto-mounted) but the segfault remained with it removed.
Does not appear to effect nas operation. (so far)
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 11 Jun 2026, 16:05
by joka388
The update to the F4-425 went smoothly. However, the hard drives are once again not going into sleep mode with this version. This worked fine with TOS version 7.0.0601. Also on F2-221.
When updating the F2-221, I again received an error message stating that the update could not be extracted. An update was only possible after enabling debug mode. Updates up to TOS 7.0.0601 also always worked correctly. This has only stopped working on my F2-221 since TOS 7.0.0616. I will install some more RAM today and see what happens. I haven't changed any settings on the NAS related to the previous updates.
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 11 Jun 2026, 17:34
by TMroy
imranalam wrote: ↑11 Jun 2026, 00:34
plz share down load link for local upgrade, I am unable to get login screen now
Your issues are not clear, we can not just drop you an update package, it does not help. please provide specifics description to help us understand what is going on.
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 11 Jun 2026, 18:51
by snapsh0t
joka388 wrote: ↑11 Jun 2026, 16:05
The update to the F4-425 went smoothly. However, the hard drives are once again not going into sleep mode with this version. This worked fine with TOS version 7.0.0601. Also on F2-221.
Yes, I've just noticed the HDDs in my F2-425+ are still clunking away. I'll try disabling HDD sleep then re-enabling it.
And three hours later they're still clunking.
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 11 Jun 2026, 22:46
by CursaYang
You can use the `hdparm -Y` command to put the hard drive into hibernation mode.
Additionally, you can use the following command to confirm who is waking the hard drive: `blktrace -d /dev/sdX -o - | blkparse -i -`
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 12 Jun 2026, 00:26
by joka388
CursaYang wrote: ↑11 Jun 2026, 22:46
You can use the `hdparm -Y` command to put the hard drive into hibernation mode.
Additionally, you can use the following command to confirm who is waking the hard drive: `blktrace -d /dev/sdX -o - | blkparse -i -`
However, this information must be entered again after a restart.
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 12 Jun 2026, 09:52
by TMroy
snapsh0t wrote: ↑11 Jun 2026, 18:51
joka388 wrote: ↑11 Jun 2026, 16:05
The update to the F4-425 went smoothly. However, the hard drives are once again not going into sleep mode with this version. This worked fine with TOS version 7.0.0601. Also on F2-221.
Yes, I've just noticed the HDDs in my F2-425+ are still clunking away. I'll try disabling HDD sleep then re-enabling it.
And three hours later they're still clunking.
It looks like the file system is doing some data housekeeping. Follow the tips from customer support to find out which processes are keeping the disk busy.
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 12 Jun 2026, 14:00
by joka388
TMroy wrote: ↑12 Jun 2026, 09:52
snapsh0t wrote: ↑11 Jun 2026, 18:51
joka388 wrote: ↑11 Jun 2026, 16:05
The update to the F4-425 went smoothly. However, the hard drives are once again not going into sleep mode with this version. This worked fine with TOS version 7.0.0601. Also on F2-221.
Yes, I've just noticed the HDDs in my F2-425+ are still clunking away. I'll try disabling HDD sleep then re-enabling it.
And three hours later they're still clunking.
It looks like the file system is doing some data housekeeping. Follow the tips from customer support to find out which processes are keeping the disk busy.
Sorry for the question, but how do I correctly enter the commands into the terminal so that I get a result?
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 12 Jun 2026, 14:48
by CursaYang
Please enter the following command in the terminal.
Code: Select all
blktrace -d /dev/sdX -o - | blkparse -i -
Please replace sdX with the actual device name, such as sda.
Re: TOS 7.0.0706 Beta (X86) is Released for Update
Posted: 12 Jun 2026, 15:46
by joka388
The Data from F4-425
8,0 2 1 0.000000000 0 C N [0]
8,0 2 2 0.000897833 0 C R [0]
8,0 2 3 0.031491858 0 C R [0]
8,0 2 4 0.041197724 0 C R [0]
8,0 3 4 0.000015117 19005 D R 512 [smartctl]
8,0 3 5 0.009646187 19005 D R 512 [smartctl]
8,0 3 6 0.031509558 19005 D R 512 [smartctl]
8,0 2 5 10.454021254 19018 D R 36 [smartctl]
8,0 2 6 10.454036208 33 C R [0]
8,0 2 7 10.454081932 19018 D N 0 [smartctl]
8,0 2 8 10.454226594 0 C N [0]
8,0 2 9 10.454244469 19018 D R 512 [smartctl]
8,0 2 10 10.455136801 0 C R [0]
8,0 2 11 10.464007023 19018 D R 512 [smartctl]
8,0 2 12 10.486673022 0 C R [0]
8,0 2 13 10.486697985 19018 D R 512 [smartctl]
8,0 2 14 10.496386537 0 C R [0]
8,0 2 15 20.895706914 0 C N [0]
8,0 2 16 20.896615096 0 C R [0]
8,0 0 1 20.895498222 19038 D R 36 [smartctl]
8,0 0 2 20.895513071 17 C R [0]
8,0 0 3 20.895557315 19038 D N 0 [smartctl]
8,0 0 4 20.895723651 19038 D R 512 [smartctl]
8,0 0 5 20.905406013 19038 D R 512 [smartctl]
8,0 2 17 20.931839692 0 C R [0]
8,0 2 18 20.941543760 0 C R [0]
8,0 0 6 20.931865133 19038 D R 512 [smartctl]
8,0 2 19 31.341003778 19049 D R 36 [smartctl]
8,0 2 20 31.341018466 33 C R [0]
8,0 2 21 31.341059335 19049 D N 0 [smartctl]
8,0 2 22 31.341242902 0 C N [0]
8,0 2 23 31.341257659 19049 D R 512 [smartctl]
8,0 2 24 31.342154552 0 C R [0]
8,0 2 25 31.350869049 19049 D R 512 [smartctl]
8,0 2 26 31.376996259 0 C R [0]
8,0 2 27 31.377010756 19049 D R 512 [smartctl]
8,0 2 28 31.386700641 0 C R [0]
8,0 2 29 41.746961178 0 C N [0]
8,0 2 30 41.747872491 0 C R [0]
8,0 1 1 41.746750718 19058 D R 36 [smartctl]
8,0 1 2 41.746767820 27 C R [0]
8,0 1 3 41.746809815 19058 D N 0 [smartctl]
8,0 1 4 41.746976595 19058 D R 512 [smartctl]
8,0 2 31 41.782013953 0 C R [0]
8,0 2 32 41.791717532 0 C R [0]
8,0 1 5 41.756721455 19058 D R 512 [smartctl]
8,0 1 6 41.782028203 19058 D R 512 [smartctl]
8,0 2 33 52.187149012 19081 D R 36 [smartctl]
8,0 2 34 52.187166546 33 C R [0]
8,0 2 35 52.187208282 19081 D N 0 [smartctl]
8,0 2 36 52.187363570 0 C N [0]
8,0 2 37 52.187378370 19081 D R 512 [smartctl]
8,0 2 38 52.188310595 0 C R [0]
8,0 2 39 52.197112317 19081 D R 512 [smartctl]
8,0 2 40 52.227174230 0 C R [0]
8,0 2 41 52.227198675 19081 D R 512 [smartctl]
8,0 2 42 52.236871684 0 C R [0]
8,0 2 43 62.654034254 0 C N [0]
8,0 2 44 62.654937602 0 C R [0]
8,0 1 7 62.653824957 19089 D R 36 [smartctl]
8,0 1 8 62.653840535 27 C R [0]
8,0 1 9 62.653883742 19089 D N 0 [smartctl]
8,0 1 10 62.654050029 19089 D R 512 [smartctl]
8,0 1 11 62.663644630 19089 D R 512 [smartctl]
8,0 2 45 62.692395476 0 C R [0]
8,0 2 46 62.702096824 0 C R [0]
8,0 1 12 62.692416189 19089 D R 512 [smartctl]
8,0 1 13 73.066874620 19099 D R 36 [smartctl]
8,0 1 14 73.066888177 27 C R [0]
8,0 1 15 73.066928728 19099 D N 0 [smartctl]
8,0 2 47 73.067077253 0 C N [0]
8,0 1 16 73.067094523 19099 D R 512 [smartctl]
8,0 2 48 73.067988469 0 C R [0]
8,0 1 17 73.076705201 19099 D R 512 [smartctl]
8,0 2 49 73.107451277 0 C R [0]
8,0 1 18 73.107474348 19099 D R 512 [smartctl]
8,0 2 50 73.117151392 0 C R [0]
8,0 2 51 83.488396194 19122 D R 36 [smartctl]
8,0 2 52 83.488410474 33 C R [0]
8,0 2 53 83.488448121 19122 D N 0 [smartctl]
8,0 2 54 83.488595419 0 C N [0]
8,0 2 55 83.488612254 19122 D R 512 [smartctl]
8,0 2 56 83.489499039 0 C R [0]
8,0 2 57 83.498221115 19122 D R 512 [smartctl]
8,0 2 58 83.522498333 0 C R [0]
8,0 2 59 83.522520613 19122 D R 512 [smartctl]
8,0 2 60 83.532209696 0 C R [0]
8,0 2 61 93.935951395 0 C N [0]
8,0 2 62 93.936856291 7720 C R [0]
8,0 1 19 93.935736831 19132 D R 36 [smartctl]
8,0 1 20 93.935750842 27 C R [0]
8,0 1 21 93.935792900 19132 D N 0 [smartctl]