TOS 7.0.1536 (x86) Official Release Update

Official news about TOS, mobile app, PC app updates or beta releases.
User avatar
Crashoveride
Posts: 14
Joined: 15 Sep 2026, 19:59
Russia

Re: TOS 7.0.1536 (x86) Official Release Update

Post by Crashoveride »

Additional experiment: SMB Multichannel with one 10GbE Mac adapter and two 5GbE NAS ports

Hello everyone,

I'd like to share the results of another experiment with my TerraMaster F4-425 Pro running TOS 7.

After receiving my TP-Link TL-SX105 V4.0 10GbE switch, I attempted to configure SMB Multichannel using both 5GbE interfaces on the NAS and a single 10GbE adapter on my Mac mini M4.

The configuration was based on this TrueNAS community article:
https://forums.truenas.com/t/lacp-smb-n ... tion/35232

The author reported successfully combining two 2.5GbE NAS connections through a single 10GbE Mac interface using two IP addresses on separate subnets.

My configuration

- Mac mini M4 with ACASIS NT0201 Thunderbolt 10GbE adapter
- TerraMaster F4-425 Pro with two 5GbE interfaces
- TP-Link TL-SX105 V4.0 unmanaged 10GbE switch
- Mac en10: 10GbE, with two IPv4 addresses (192.168.1.113 and 10.10.10.2)
- NAS eth0: 192.168.1.100, 5GbE
- NAS eth1: 10.10.10.1, 5GbE
- SMB Multichannel enabled on both macOS and Samba

Testing and observations

- The Mac successfully negotiated a 10GbE connection with the switch.
- Both NAS interfaces negotiated 5GbE.
- Both NAS IP addresses were reachable from the Mac through en10, including TCP port 445.
- Samba reported server multi channel support = Yes.
- macOS reported Multichannel ON: yes.
- However, smbutil multichannel consistently showed only one active 5GbE channel, connected to 10.10.10.1.
- The second NAS interface (192.168.1.100) was detected but remained idle.
- I tested transfers in both directions using Finder and ditto, but the second channel was never activated.
- I also checked the NAS network drivers. Both interfaces use r8169, expose a single RX queue, and report receive-hashing: off [fixed].
- The NAS also advertised a Docker bridge interface (172.18.0.1) in its SMB network interface information.

Result

Despite both physical NAS interfaces being available and SMB Multichannel being enabled, macOS continued to use only one 5GbE channel.

I have since reverted to a simpler configuration: one active 5GbE NAS interface, MTU 1500, and SMB Multichannel disabled.

My question to TerraMaster

Is this behavior an expected limitation of SMB Multichannel with the current TOS 7 Samba implementation and network drivers, or should this configuration theoretically support simultaneous connections to both NAS interfaces through a single 10GbE Mac adapter?

I'm particularly interested in whether the reported network interface capabilities or Samba's interface advertisement could explain why the second channel remains idle.

I would appreciate any technical clarification from the TerraMaster team.

Thank you!
TerraMaster F2-425 Plus (Intel N95)
TerraMaster F4-425 Pro (Intel N350)
User avatar
CursaYang
TM Support
Posts: 1017
Joined: 06 Jan 2025, 16:34
China

Re: TOS 7.0.1536 (x86) Official Release Update

Post by CursaYang »

Thank you for the additional information; we will share it with our product team for analysis.
To contact our team, please send email to following addresses, remember to replace (at) with @

Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
User avatar
mnewland
Posts: 39
Joined: 23 Apr 2023, 05:28
Great Britain

Re: TOS 7.0.1536 (x86) Official Release Update

Post by mnewland »

T6-423 when i logged into my nas last night nothing would load, couldn't get into anything and the menu bar didn't display properly... it did resolve after a reboot though
My TNAS
  • Device = T6-423
  • RAM = 32gb official Terramaster ram
  • Disks = 3 x Seagate IronWolf ST400VN006 4TB
  • TOS = 7.0.1536
  • BIOS = 5.19
  • Mobile App = 3.5.102
NAS always run in Security Isolation Mode
User avatar
EriChan
TM Support
Posts: 472
Joined: 06 Jan 2026, 12:27
China

Re: TOS 7.0.1536 (x86) Official Release Update

Post by EriChan »

mnewland wrote: ↑16 Nov 2026, 23:25
We're glad to hear that a reboot resolved the issue for now.

If you encounter this issue again in the future, please reach out to our online support team via the link below so they can assist with further troubleshooting:
https://salesiq.zohopublic.com/signatur ... 97d0be8892
To contact our team, please send email to following addresses, remember to replace (at) with @

Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
User avatar
exqo
Posts: 46
Joined: 20 Dec 2025, 19:54
France

Re: TOS 7.0.1536 (x86) Official Release Update

Post by exqo »

mnewland wrote: ↑16 Nov 2026, 23:25 T6-423 when i logged into my nas last night nothing would load, couldn't get into anything and the menu bar didn't display properly... it did resolve after a reboot though
Hello,
I had this kind of issue some time ago with my previous F4-424 with kernel issue. The problem appears when the CPU was 100%, you can logged in but impossible to use it. The only way to fix it was to hard reboot the NAS.
Monitor your problem with debug mode and atop command, then submit your analysis to Terramaster support.
F4-425 Plus (N95) - 2x4TB (Ironwolf) Traid + 1x8TB (WD Red)
TOS: 7.0.1422
RAM: 8GB
Bios: BJFX-TWLX-108
User avatar
Asdrubal
Posts: 10
Joined: 06 Jun 2026, 11:22
France

Re: TOS 7.0.1536 (x86) Official Release Update

Post by Asdrubal »

A l'attention de CursaYang

Dites-moi .. Grand silence de mort ?
Aucun retour de l'équipe produit, à propos de mon script que vous leur avez soumis ?
Qu'en pensent-ils, l'ont ils finalisé, suit-il la bonne déontologie de ce qui existe ?
A défaut de rien, ce script serait déjà quelque-chose .. Non ?

Asdrubal.
User avatar
TMzethar
TM Support
Posts: 3116
Joined: 27 Oct 2020, 16:43

Re: TOS 7.0.1536 (x86) Official Release Update

Post by TMzethar »

Asdrubal wrote: ↑19 Nov 2026, 18:17
This has been submitted to the project team and is likely still under discussion. We will notify you of any updates.
Additionally, since this thread is primarily for discussing the contents of the newly released version, if you have other comments to share in the future, we recommend that you start a separate thread.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
User avatar
TMvalen
Posts: 16
Joined: 02 Jul 2025, 11:37
China

Re: TOS 7.0.1536 (x86) Official Release Update

Post by TMvalen »

Crashoveride wrote: ↑15 Nov 2026, 20:04
Hello,

Thank you for sharing your detailed testing results. We have conducted additional tests to investigate this behavior.

Our tests indicate that this is a limitation of the macOS SMB client. macOS does not treat multiple IP addresses configured on a single physical network interface as separate SMB interfaces, so only one channel is established in this configuration.

We also verified that SMB Multichannel works correctly with two independent client network interfaces. On Windows, a single client interface can also establish two channels to the NAS's two network interfaces, even without RSS support on the NAS.

Therefore, your NAS configuration is working as expected. To utilize both 5GbE interfaces simultaneously, we recommend using two independent network interfaces on the client, or using a single higher-speed network connection.

Thank you again for your feedback and for helping us improve our products.
To contact our team, please send email to following addresses, remember to replace (at) with @

Technical team: support(at)terra-master.com(for technical support)

Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
User avatar
Asdrubal
Posts: 10
Joined: 06 Jun 2026, 11:22
France

Re: TOS 7.0.1536 (x86) Official Release Update

Post by Asdrubal »

Messieurs. (Un défilé trop nombreux.)

Vous êtes tous lassants, répétitifs et sans solution.
Officiellement, l'aide que vous revendiquez ne nous est d'aucune utilité.
Vous vous refilez le dossier pour masquer les inconsistances de vos prétentions.
Ma continuelle insistance, partout où je suis, vous porte à limites.

Je découvre que NATIVEMENT, vos NAS ne sont pas du tout prévus pour supporter des automatismes orientés vers les renouvèlements des certificats Let's Encrypt.

Ce qui signifie, que l'achat d'un NAS chez vous, ait été la plus significative et grossière erreur que nous ayons pu faire.

Lorsqu'on vous communique un script, vous n'avez même pas la décence et encore moins la correction de nous en retourner le moindre avis.
Normal, le sujet vous dépasse.

Je vais poursuivre partout, puisque vous m'évincez.

Pour rappel historique vécu : Nous avons pataugé lamentablement pendant 4 mois, dans l'intention de migrer simplement de Tos6 vers 7.
Blocage soudain du téléchargement à 9% suivit d'un arrêt ..?
Problème connu de vos services, et resté totalement irrésolu.
C'est accidentellement, que nous sommes parvenus à débloquer cette situation.

Let's Encrypt, n'est absolument pas au panel de vos soucis.
Software complexe, Tos7 ne supporte pas ou pose des problèmes, sujet tabou !
Aucune mise à jour, ne s'inscrit ici, même en prévisionnel à venir.
Projet accepté, départ engagé. Sept mois plus tard = Même rhétorique ???

TOS est orienté principalement, à tout certificat valide un an.
Contraindre des interventions manuelles, face aux gratuités de 89 jours.

Alors ? A propos du script déposé sur le forum.
Est-il réaliste, comment peut-on l'améliorer, cet automatisme est-il possible ?
Faut-il bannir le TOS et le remplacer par …….
Ou fuir les contraintes TerraMaster, pour s'épanouir chez Synology ?
(Désolé, mais Synology supporte " nativement" cette géniale fonction ..)

Pour finir, si cela vous dérange que je poste ici, tant mieux !!!
Ce fil contient, à ma connaissance, tous les tracas de vos utilisateurs.

Asdrubal.
Post Reply

Return to “Update Notice”