D4 SSD Running In Proxmox Not Detecting Drives

[longy1234]

Hi There

I have a Minisforum MS-01 running Proxmox 8.4.14. Its got an established Terramaster D4-320 which has been running fine for some time.

I recently added a D4 SSD to the other Thunderbolt port on the back. The 4 x 4 TB drives (Lexar NM790) I have added in the bay are not found so cannot be passed through to Truenas in the same way I have done for the other device.

All 4 drives are found and work correctly when I connect the D4 SSD to a windows PC.

Just wondering if I need to do something else in Proxmox to enable the drive or if their is a known issue with this drive and Proxmox before I return it?

Thanks

[CursaYang]

Normally, no additional settings are required in Proxmox.
You can try using one or two SSDs separately to see if they can be recognized. You can also try replacing other interfaces and cables.

[longy1234]

Thank you for your reply. I translated it to... "Under normal circumstances, no additional settings are needed in Proxmox. You can try using one or two SSDs to see if they can be recognized. You can also try replacing them with other models or brands."

I have tried a different (single) nvme drive 256gb and that is not recognised in the MS-01 Proxmox build or in another mini PC running proxmox.

Unless you have an alternative suggestion I will return the item and use a DAS from a different manufacturer?