TOS 6.0.555 (X86) is Released for Update

[ColaChen]

Do you mean you can't start "debug" mode? Could you please describe it in detail?

[addx972]

I can confirm that the automatic nas shutdown does not work.

[ChairmanMao]

Code: Select all

{senselessusername}@NAS-T1:/# cat /sys/kernel/debug/dri/0/gt/uc/guc_info
GuC firmware: i915/tgl_guc_70.bin
        status: RUNNING

Maybe you could identify your system (model/Tos version) so someone can make sense of what you are stating.

Oops, my bad. I can see your's running perfectly fine.
I've updated my firmware to this latest version and on inputting those command. I received an output of "GuC disabled".

[ramatazzz]

My F5-422 updated without problems 5.1.145 - 6.0.530 - 6.0555. After correcting the rights to the folders, Plex started working. But qbittorrent does not want to start. When I try to start it says "operation failed". Please tell me what other settings I should look at?

[Gremlin]

Sorry, Works fine. Mine shuts down every night and re-starts every morning, as I set it to do.

[ramatazzz]

But qbittorrent does not want to start

The problem was solved by installing new version of qbittorrent 4.6.6 from outkastm together with required phyton 3.8

[addx972]

Good for you, but since the update, my NAS won't turn off and on.

[Gremlin]

Which model NAS do you have?

[addx972]

F4-424

[star]

SMB in this update is unstable. nas freezeing and cannot be acessed. all we get in error log is SMB unstable.

Try configuring static host file on the nas of you network pc's
"/etc/hosts".

and mounting with ip to eliminate any dns issue , helped me, i think...

We factory reset the nases that was affected by the kernel panic and smb unstable.

Once factory reset everything was ok.

So proboly something in the update must gone wrong or corrupted. but once factory reset was done everything was stable.