I sent the drives back after Seagate told me the sounds are not normal.
Seagate New Drives Noises Pulsing
Re: Seagate New Drives Noises Pulsing
I tried the drives in all four slots, same pounding/pulsing sounds.
The D8 is is set on Single.
Was going to use the drives for video, audio storage with jellyfin and eventually a NAS.
The other 2 8GB Seagate drives do not make the sounds the 12GB drives did, they are relatively quiet (I've transferred about 6TBs in video files to those 2 drives in the D8). I have 2 more of the 12GB drives coming from Bestbuy this time and will try again when they arrive tomorrow.
Re: Seagate New Drives Noises Pulsing
I had a listen. Sounds more like a low speed, ship, diesel engine rather than a 5400rpm drive.
F5-221 TOS7.0.0777 - 4x4TB (Ironwolf) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
Re: Seagate New Drives Noises Pulsing
Got the 2 new 12TB Seagate IronWolf drives yesterday and pretty the same noises at idle.... https://drive.proton.me/urls/HH85V3XA7R#GZ0Lm5JjOPtM
Here's the 2 8TB drives noises at idle.... https://drive.proton.me/urls/TXHGX09J20#LHMwKUh4z3OX
I'm not understanding why the 12TB drives (this makes 6 of them now) are making these noises when the 8TB drives don't?
Here's the 2 8TB drives noises at idle.... https://drive.proton.me/urls/TXHGX09J20#LHMwKUh4z3OX
I'm not understanding why the 12TB drives (this makes 6 of them now) are making these noises when the 8TB drives don't?
Re: Seagate New Drives Noises Pulsing
Sent all 6 of the 12TB Seagate drives back and had a 18TB Toshiba drive delivered today, no noises at idle, quiet as the 8TB Seagate drives.
Re: Seagate New Drives Noises Pulsing
Do you happen to have the model no(s) of the 'noisy' segate 12MB drives for reference?
F5-221 TOS7.0.0777 - 4x4TB (Ironwolf) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
Re: Seagate New Drives Noises Pulsing
Bought 6 drives, 4 from Amazon, 2 from Best Buy, all the same model...
Seagate IronWolf 12TB NAS Internal Hard Drive HDD – 3.5 Inch SATA 6Gb/s 7200 RPM 256MB Cache for RAID Network Attached Storage – Model: ST12000VN0008
Seagate IronWolf 12TB NAS Internal Hard Drive HDD – 3.5 Inch SATA 6Gb/s 7200 RPM 256MB Cache for RAID Network Attached Storage – Model: ST12000VN0008
- fanquestions
- Posts: 6
- Joined: 14 Aug 2024, 00:15

Re: Seagate New Drives Noises Pulsing
It's common to have same model of HDDs but different sizes to sound differently. It's just another hassle to deal with while purchasing HDDs these days. You simply need to do a proper research.. Do reddit / NAS focused websites with YT tests 
Re: Seagate New Drives Noises Pulsing
Well, when the drives manufacturer says the noises aren't normal then I'm done "researching" and moving on to plan Bfanquestions wrote: ↑18 Sep 2024, 17:52 You simply need to do a proper research.. Do reddit / NAS focused websites with YT tests![]()
- Fusepack01
- Posts: 1
- Joined: 29 Sep 2024, 03:13

Re: Seagate New Drives Noises Pulsing
I bought a new f4-424 pro and put in two seagate st10000vn000 - 3ak101 10TB drives (on the recommended list)- Worked fine.
I then told the system to never power down the drives.
It started making awful noises and using high cpu and slowly became more and more unstable not showing any hard drive storage pool or volume data.
turning the HD power off setting back to 30 mins and the system was happy again.
Anyone else ?
I then told the system to never power down the drives.
It started making awful noises and using high cpu and slowly became more and more unstable not showing any hard drive storage pool or volume data.
turning the HD power off setting back to 30 mins and the system was happy again.
Anyone else ?
