I am new to using nas, and the first one I use is my new F4-423, I am doing tests to get used to its operation.
After initializing it with a 1Tb HDD on a Single Disk, and recording some data, I put another 1Tb hard drive on it, my intention was to change it to TRAID, but from what I see this is not possible, , it has become a RAID 1
How can I go from Single Disk to TRAID or from RAID 1 to TRAID?
Thank you,
Go from Single Disk to TRAID
Re: Go from Single Disk to TRAID
If you want to go for TRAID, you have to do that from the beginning. Single or RAID 1 can't migrate to TRAID.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: Go from Single Disk to TRAID
Can you migrate to Raid-5 from Raid-1 in TOS?
F5-221 TOS7.0.0777 - 4x4TB (Ironwolf) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
F2-424 TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.0777 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.0777 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
Re: Go from Single Disk to TRAID
I am wondring about this too, so if I understand what is being said here corectly, if I am setting up my NAS for the first time I can use one drive.
In order to use TRAID I need a second drive.
I then convert my Single drive to RAID 1, then add the second drive and follow the prompts to make make it TRAID.
Sound right?
In order to use TRAID I need a second drive.
I then convert my Single drive to RAID 1, then add the second drive and follow the prompts to make make it TRAID.
Sound right?
F4-423 TOS 6.0.673 - Plex Server and media
F4-223 TOS 6.0.673 - Backup for Plex server and media
F4-223 TOS 6.0.673 - Backup for Plex server and media
Re: Go from Single Disk to TRAID
Im wondering that too....
Re: Go from Single Disk to TRAID
If there is only one disk, you can also set it to TRAID. When there is only one disk on TRAID , you can consider it as Single.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: Go from Single Disk to TRAID
That makes the process of setting up TRAID at the start a lot easier than I thought it would be. Thank you for for the information.
F4-423 TOS 6.0.673 - Plex Server and media
F4-223 TOS 6.0.673 - Backup for Plex server and media
F4-223 TOS 6.0.673 - Backup for Plex server and media
Re: Go from Single Disk to TRAID
I too am going from single drive to TRAID. I have added a 20TB drive and a 8TB drive. Both are installed as TRAID. Storage Pool shows both TRAID and Single Disk. I can still access Plex files from presumably the original single drive configuration, but I have been unable to access any data on the new TRAID. What step am I missing?