Page 1 of 2
TOS Login HTTPS
Posted: 23 May 2020, 00:13
by vichi95
Hi,
at now i log in into tos desktop in http, how can i set https?
Thanks
Re: TOS Login HTTPS
Posted: 23 May 2020, 18:20
by TMroy
Hi vichi95,
To login your TOS with HTTPS, you need to login with IP address and follow a https port, for example 192.168.0.10:5443. To check or change the port, go to TOS > Control panel > Network service > network > General settings.
Re: TOS Login HTTPS
Posted: 23 May 2020, 21:18
by vichi95
I've tried to log in with port 5443 (default) but this error appean:
NET::ERR_CERT_COMMON_NAME_INVALID
Subject: *.tnas.link
Issuer: RapidSSL RSA CA 2018
Expires on: 16 ott 2021
Current date: 23 mag 2020
Re: TOS Login HTTPS
Posted: 23 May 2020, 23:11
by TMroy
Did you remotely login?
Re: TOS Login HTTPS
Posted: 24 May 2020, 01:12
by vichi95
I've tried with local address and with .ddns service, i've also regenerate ssl certificate
Re: TOS Login HTTPS
Posted: 24 May 2020, 12:16
by TMroy
TOS login HTTPS with your ddns service, input https://ddns_domain_name:5443, and upload ssl certificate of your ddns domain. By the way, you need to map port 5443 in your router settings too.
Re: TOS Login HTTPS
Posted: 15 Oct 2020, 15:28
by vichi95
Where can i upload the No-ip's certificate?
Re: TOS Login HTTPS
Posted: 16 Oct 2020, 12:13
by TMSupport
What's your current TOS version? Only TOS4.2.04 or later versions support uploading certificate.
Re: TOS Login HTTPS
Posted: 16 Oct 2020, 16:08
by vichi95
Actually 4.1.30. So, when a stable version of TOS 4.2.X will be release?
Re: TOS Login HTTPS
Posted: 27 Oct 2020, 23:53
by sports_wook
TMroy wrote: ↑24 May 2020, 12:16
TOS login HTTPS with your ddns service, input https://ddns_domain_name:5443, and upload ssl certificate of your ddns domain. By the way, you need to map port 5443 in your router settings too.
I've tried following these instructions on my F2-220 running 4.2.05 and the certificate will not upload. The "Apply"button has no effect after the certificate/key are uploaded.