TerraMaster Forum

HI

I bought the 10Gbe f422, i'm trying to create a LACP link with all the port (2 1Gbe and 10 Gbe) I didnt have a 10Gbe switch for now.
I'm using a 1Gbe switch and the autonegociation for the 10Gbe don't work and do not swap to 1Gigabit (no link detected)

It is possible to create a 3 link agg with all the port ?

It's not suggested to create link aggregation with all 3 ports including 10Gbe port. It's better to create link aggregation with 2 1Gbe network ports.

There would be no benefit from what you propose even if it was possible, (It's not possible to use different speed links for Link Aggregation, https://www.juniper.net/documentation/e ... interfaces)

Thank's for the reply.
Yes I know that I cannot use 1 10Gbe port in link aggregation with 1 Gig ports. I wanted to do it by forcing the speed to 1gbit / s on the 10Gbe port