[Help] F4-424 MAX Can't Access USB Device by tty
Posted: 11 Aug 2025, 01:57
Hi ,
I have F4-424 MAX I connect Aeon 5 Zstick to USB port but I can see it only in the connected devices list but no /dev/tty* ports are instantiated, making it impossible to access it. I want to use it in homeasistant to use Z-wave.
Info from DMESG:
[ 1305.304870] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 1305.431805] usb 1-5: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00
[ 1305.431809] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
fr3sh@TNAS:~# lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0658:0200 Sigma Designs, Inc.
Bus 001 Device 002: ID 058f:6387 Alcor Micro Corp. Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
fr3sh@TNAS:~# ls -l /dev/ttyACM* /dev/ttyUSB*
ls: cannot access '/dev/ttyACM*': No such file or directory
ls: cannot access '/dev/ttyUSB*': No such file or directory
Is there any way to associate it to a usb port?
Thank you
I have F4-424 MAX I connect Aeon 5 Zstick to USB port but I can see it only in the connected devices list but no /dev/tty* ports are instantiated, making it impossible to access it. I want to use it in homeasistant to use Z-wave.
Info from DMESG:
[ 1305.304870] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 1305.431805] usb 1-5: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00
[ 1305.431809] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
fr3sh@TNAS:~# lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0658:0200 Sigma Designs, Inc.
Bus 001 Device 002: ID 058f:6387 Alcor Micro Corp. Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
fr3sh@TNAS:~# ls -l /dev/ttyACM* /dev/ttyUSB*
ls: cannot access '/dev/ttyACM*': No such file or directory
ls: cannot access '/dev/ttyUSB*': No such file or directory
Is there any way to associate it to a usb port?
Thank you