here the output:
root@TNAS-44E0:~# /etc/tos/scripts/mntdata
script mntdata get lock
dev.raid.speed_limit_max = 200000
dev.raid.speed_limit_min = 100000
mdadm: /dev/md9: no change requested
mdadm: /dev/md8: no change requested
mdadm: Fail create md0 when using /sys/module/md_mod/parameters/new_array
mdadm: /dev/md0 assembled from 1 drive - not enough to start the array.
mdadm: error opening /dev/md0: No such file or directory
public 1
appdata 1
coresize=3072
swapsize=2048
fireware=
https://download3.terra-master.com/TOS% ... 260950.ins
md5=8821252485b99b357d145b972289a073
version=4.2.44
script mntdata put lock
root@TNAS-44E0:~#
root@TNAS-44E0:~# smartctl -a /dev/sdb
smartctl 6.6 2017-11-05 r4594 [aarch64-linux-4.4.18-g8bcbd8a-dirty] (localbuild)
Copyright (C) 2002-17, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4
Device Model: WDC WD2003FYYS-18W0B0
Serial Number: WD-WMAY02083639
LU WWN Device Id: 5 0014ee 05804e396
Add. Product Id: DELL(tm)
Firmware Version: 01.01D03
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Sep 23 13:54:02 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x05) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (29760) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 303) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 8808
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1202
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 047 047 000 Old_age Always - 39105
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 260
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 54
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1147
194 Temperature_Celsius 0x0022 114 095 000 Old_age Always - 38 (Min/Max 31/38)
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 38274 -
# 2 Short offline Completed without error 00% 38148 -
# 3 Short offline Aborted by host 50% 38116 -
# 4 Short offline Completed without error 00% 38095 -
# 5 Short offline Completed without error 00% 38038 -
# 6 Short offline Completed without error 00% 37930 -
# 7 Short offline Completed without error 00% 37803 -
# 8 Short offline Completed without error 00% 37287 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@TNAS-44E0:~# dmesg | tail -n 30
[ 41.066734] r8169 98016000.gmac eth0: link down
[ 41.066756] r8169 98016000.gmac eth0: link down
[ 41.076197] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.230017] md: md8 stopped.
[ 44.236186] md: bind<sdb3>
[ 44.241283] md/raid1:md8: active with 1 out of 24 mirrors
[ 44.246968] md8: detected capacity change from 0 to 2045771776
[ 44.592171] r8169 98016000.gmac eth0: link up
[ 44.596714] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 44.638898] r8169 98016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[ 44.647832] r8169 98016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[ 44.656743] r8169 98016000.gmac eth0: link up
[ 45.307982] Adding 1997820k swap on /dev/md8. Priority:-1 extents:1 across:1997820k
[ 84.169479] md: md0 stopped.
[ 84.173391] md: bind<sdb4>
[ 84.176287] md: md0 stopped.
[ 84.179449] md: unbind<sdb4>
[ 84.236376] md: export_rdev(sdb4)
[ 86.913310] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 86.921392] NFSD: starting 90-second grace period (net ffffff800914db00)
[ 90.407991] rtc_rtk 9801b600.rtc: rtk_rtc_disable
[ 90.412826] rtc_rtk 9801b600.rtc: rtk_rtc_enable
[ 1476.417513] md: md0 stopped.
[ 1476.422673] md: bind<sdb4>
[ 1476.425572] md: md0 stopped.
[ 1476.428614] md: unbind<sdb4>
[ 1476.486401] md: export_rdev(sdb4)
[ 1478.666942] nfsd: last server has exited, flushing export cache
[ 1478.738583] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 1478.746644] NFSD: starting 90-second grace period (net ffffff800914db00)
