Page 1 of 2

F5-221 do not start after TRAID volume extension

Posted: 10 Jun 2024, 05:34
by nemolo
Hello Everyone,
i had a setup of 3 disk of 4GB each, setted up in TRAID mode. One week ago i added a 4th disk and started the raid extension.
The job started and i closed the webpage. the day after NAS Webpage is no longer reachable.
I cant even connect via SSH, i to follow the reinstallation guide:
- remove disk
- boot nas
- when asked, reconnected disks (i tried with 3 and 4 disks)
- the system infromed me that it was to format the disks,
- STOP

What can i do?
Thanks

Re: F5-221 do not start after TRAID volume extension

Posted: 10 Jun 2024, 15:10
by TMroy
4GB disk? what is that?
What capacity of your 4th disk? if this disk meet the requirement to expand your current TRAID? if this disk healthy?

Since your 4th disk has no system partition created, it needs to be formatted so that the system can be installed on it. Your disk 3 is a member of your TRAID, why do you need to remove disk 1 and 2, just use disk 3 and 4 to reinstall system?

Re: F5-221 do not start after TRAID volume extension

Posted: 10 Jun 2024, 18:23
by nemolo
Sorry, it was a typo.
All the disks are sized 4TB.
The new disk (the 4th) was 4TB as well.
I assume that the 4th disk was formatted when i added it to the existing Storage Pool.

About this sentence: "when asked, reconnected disks (i tried with 3 and 4 disks)". i meant that i tried to reconnect the disks 1,2,3,4. Then i repeated the procedure adding only the disk 1,2,3 (that were the disks that were present BEFORE the extension)

I may add that i was running TOS 5.

Thanks

Re: F5-221 do not start after TRAID volume extension

Posted: 10 Jun 2024, 21:58
by ColaChen
You need to format the fourth hard drive separately first, instead of directly inserting the four hard drives before installing the system.

Re: F5-221 do not start after TRAID volume extension

Posted: 10 Jun 2024, 23:18
by nemolo
So what i have to do now to make the system boot again?

Re: F5-221 do not start after TRAID volume extension

Posted: 11 Jun 2024, 18:59
by TMzethar
Please check if the disks in the TRAID are from TOS4 and retain the TOS4 storage structure.
If the disks in the RAID come from TOS4, RAID expansion will not be enabled.
viewtopic.php?t=4912

Re: F5-221 do not start after TRAID volume extension

Posted: 11 Jun 2024, 19:18
by nemolo
i never had TOS4 installed, i started directly with TOS5.
also, i am not able to access webpage so i am not able to check system partition.

Re: F5-221 do not start after TRAID volume extension

Posted: 11 Jun 2024, 20:21
by nemolo
this is all that i can see:
Immagine 2024-06-11 132003.png

Re: F5-221 do not start after TRAID volume extension

Posted: 11 Jun 2024, 22:30
by TMzethar
Please contact the technical support email or send the link to this post to the customer service window on the official website, and we can arrange a remote investigation for you.

Re: F5-221 do not start after TRAID volume extension

Posted: 12 Jun 2024, 05:05
by nemolo
ok just did, thanks