TerraMaster Forum

IMPORTANT NOTICE

Attention: TOS 5.1 System Update

If your initial system was TOS 4.x and your system partition is 2GB, please refrain from updating to the new TOS 5.1 version. The updated version demands more storage space, and this requirement may not be met by your current system.

How to Check Your System Partition Size:

Navigate to "TOS > Control panel > System Info > Overview" and inspect the available space under the "/" section.

In the event that your TNAS does not meet the storage conditions but you wish to proceed with TOS 5.1.79, please follow the guidelines provided here: viewtopic.php?f=28&t=4912

Release Notes

Applicable Models: F2-220, F2-420, F4-220, F4-420, F5-420, F2-221, F2-421, F2-422, F4-221, F4-421, F4-422, F4-223, F5-221, F5-225, F5-421, F5-422, F8-421, F8-422, F2-223, F4-223, F2-423, F4-423, T6-423, T9-423, T12-423, T9-450

What's New:

1. Added RAR file format decompression functionality.
2. Introduced the ability to manage desktop notifications for Telnet/SSH.
3. Compatibility update for Terra Photos version 1.2.85.
4. Compatibility update for TNAS Mobile version 3.2.25.

Bugs Fixed:

1. Resolved issues in Security Isolation Mode.
2. Fixed problems related to hard drives.
3. Addressed issues in the HyperLock-WORM file system.
4. Resolved user-related issues.
5. Fixed issues within the File Manager.
6. Upgraded the Nginx version to 1.21.0.
7. Updated the SSL certificate for TNAS.online.

Important Notes:

• This update is exclusively intended for TOS 5.1.24 or later versions. If your current TOS version does not meet these requirements, consider updating to TOS 5 by reinstalling TOS.

• Users of TOS 5.1.37 should be aware that encrypted folders created in this version may face decryption issues in subsequent updates. It is recommended to back up data in the encrypted shared folder and delete it before proceeding with the update. This applies only to encrypted shared folders created in TOS 5.1.37.

• The kernel of TOS 5.1 has been updated to 5.15. As a result, Intel Celeron J1800/J1900 GPU drivers are no longer supported in these models. If you rely on GPU hardware video acceleration and own any of the affected models, avoid updating to TOS 5.1. These models include F2-220, F2-420, F4-220, F4-420, and F5-420.

• While the system update typically doesn't affect your hard drive data, it is strongly recommended to back up your data to ensure its safety before proceeding with the update.

How to Update Your TOS:

Manual Update:

1. Download the update package here (md5: abc1d34a13965c7d4033fcd99ee0f030).
2. Go to TOS > Control Panel > General Settings > System.
3. In the "Manual Update" section, upload the update package.
4. Click "Apply."
5. After the system update is complete, refresh your web browser.
6. Note that your TNAS's IP address may change after the update; if you can't connect with the previous IP, search for the new IP using the TNAC PC client.

TNAS PC:

After updating to TOS 5.1, ensure that your current TNAS PC is updated to version 5.0.33 or a later version. This step is essential for searching your TNAS device.

Download TNAS PC 5.0.35 for Windows OS
Download TNAS PC 5.0.41 for macOS

It is recommended to uninstall the previous version before installing this version of TNAS PC.

Issue Report:

If you encounter any issues during use, please report them on the TerraMaster official forum, or email your issue description and screenshots to pm(at)terra-master.com.

Loaded without issue and it is running as it should.

Update from 5.1.67. after 20 minutes no response. no ping no weggui no ssl. restart more than 3 times. nothing

DERIKKU wrote: ↑18 Oct 2023, 14:50 Update from 5.1.67. after 20 minutes no response. no ping no weggui no ssl. restart more than 3 times. nothing

I just checked all your posts starting from 2023 April 23 when you firstly updated to 5.1.33, you have issues with almost every update, but this does not seem happen to most of users, so please check:

1. what size of the system partition you have? because you installed back to TOS 4 once, I suspect you have only 2GB system partition;
2. if your all drives are healthy?
3. if your TNAS hardware failure?

F2-223. Updated without problems from TOS 5.1.67 to TOS 5.1.79. Let's see how everything will work in the future. Thank you!

System time display does not work. Switching to manual, synchronization with the server, synchronization with the browser leads to the appearance of the time display for a fraction of a second. After this, do the NaN NaN NaN appear again.

pic

Hi, I have the same time issue of the user "ostaporomo". My TOS was 5.1.67 and was fresh installed a month ago in a new TNAS F4-423 device. As you can see, the time isn't visible: The time has null value everywhere, also in Control Panel > Region & Language > Time settings. I noticed that after update, the "Time zone" field is empty. If also fill the field, the issue still occurs. Could you kindly check and solve the issue? Thanks and Best Regards!

Please change the date and time format to see if it displays properly.