TOS 5.1.67 (X86) is Released for Update

[TMroy]

Your RAID or file system could be corrupt. Is your hard drive healthy? Any power failure happened or did you shut down your device without following the shutdown routine?

[thierrys73]

{L_BUTTON_AT}TMroy

the disk are ok and i have to press a long time the button power because the tnas has freeze.
i try to repare the system file with your process without success

have you a solution for repare it ?

thanks

[ostaporomo]

Hello! Indexing of media files does not work. The checkbox is disabled after pressing the "apply" button

[Gremlin]

{L_BUTTON_AT}joka388

Finally got around to updating to 5.1.67. I can confirm that setting auto off/start times (enabled or not) does not currently interfere with transfer speeds on my system.

[I did previously do a re-install of 5.1.41 which did not cure the issue.]

[emperorgr]

F2-422 installation fresh from 5.1.24->5.1.67 and SMB speeds are not normal, i have two HDD, at the HDD the TOS is installed seems like capped to 50MB reading/writing, at the other HDD seems liked capped around 150Mb/sec, which is rather strange, with previous 5.0.xx i had around 200-250mb/sec at both HDD, something is wrong

[TMroy]

{L_BUTTON_AT}TMroy

the disk are ok and i have to press a long time the button power because the tnas has freeze. i try to repare the system file with your process without success have you a solution for repare it ? thanks

Please write an email to our support team and ask if they can help, or you have to find a service provider locally to rescue your data.

[ERESEN]

TNAS PC Setup 5.0.35.exe

It is no longer working on "OS Name Microsoft Windows 11 Pro Insider Preview Version 10.0.25947 Build 25947"

I have installed OS 4 times without any additional software on the same hardware that was working.
I installed it as the first item on a clean standard OS!
It installs fine but never finds TNAS F4-421, tried reinstalling and Turning off all firewalls and A/V too.



Regards
Eresen

[TMwuu]

{L_BUTTON_AT}ERESEN

You can refer to this link to check:viewtopic.php?f=76&t=3815

[XFNeo]

Hi! I have updated TOS on my F2-423. After the update, my OpenVPN does not work properly: when I connected to it internet is not working at all, but I can open TOS UI using IP 172.10.11.1.

VPN Server 2.0.49

[TMqiky]

Please clear your browser cache and try to connect again.