thumbnailDaemon loaded the processor on 53% , what should I do? The system started working slowly, stopped working transmission
TOS 5.1.41 (X86) is Released for Update
Re: TOS 5.1.41 (X86) is Released for Update
TNAS: F2-223, 32GB Ram, TOS 5.1.41, 1x3TB WDRed ext4
Re: TOS 5.1.41 (X86) is Released for Update
After about 1 hour, everything returned to normal, the CPU load is 1%!
TNAS: F2-223, 32GB Ram, TOS 5.1.41, 1x3TB WDRed ext4
Re: TOS 5.1.41 (X86) is Released for Update
Installation went very well on F4-420
Thanks
Thanks
Kind regards
O.T.Eresen
O.T.Eresen
Re: TOS 5.1.41 (X86) is Released for Update
Upgraded F2-221 from 5.1.40 to 5.1.41 with no issues to report
Re: TOS 5.1.41 (X86) is Released for Update
Updated from 5.1.24 to 5.1.41 and uptime still show 149 days! Is this normal? why nas sounds 'beep' but not rebooted?
F5-221 5.1.123 8GB System partition 4x4.00TB Seagate IronWolf TRAID/BTRFS
Re: TOS 5.1.41 (X86) is Released for Update
{L_BUTTON_AT}mmalchuk
It is found that your device model is of the previous generation, and it basically uses TOS4. The partition structure from TOS4 is not suitable for the new version of TOS5. Please install it back to TOS5.1.24. Or you can refer to this backup and reset the hard disk:
viewtopic.php?f=28&t=4912To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: TOS 5.1.41 (X86) is Released for Update
kidding? it flawlessly run TOS5 since 5.0.x versions for almost an year!
F5-221 5.1.123 8GB System partition 4x4.00TB Seagate IronWolf TRAID/BTRFS
Re: TOS 5.1.41 (X86) is Released for Update
waiting for a couple hours and issuing the 'reboot' command from the ssh helps)
F5-221 5.1.123 8GB System partition 4x4.00TB Seagate IronWolf TRAID/BTRFS
Re: TOS 5.1.41 (X86) is Released for Update
I have a strange error here. I reset the F2-221 with firmware 5.1.41 and everything works as it should. However, as soon as I enter the start times for my NAS (it starts at different times every day), the transfer rate drops from 113 Mb/s to just 22 Mb/s. I'm starting to despair here. Reinstalled again and everything works until I enter the start times for my NAS. The transfer rate from the Windows PC to the NAS drops again to 22 Mb/s.
Re: TOS 5.1.41 (X86) is Released for Update
{L_BUTTON_AT}joka388
You can refer to the link below to troubleshoot the problem:
viewtopic.php?f=77&t=527
Or you can try another computer.To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)