Hi.
It's been a while since I created my shared folders and I'm not sure if they are encrypted or not. As a test, I created a test encrypted shared folder and then viewed the shared folder list but it doesn't specify whether it is encrypted. It just looks like any other folder...
Is there a way I can tell which folders are encrypted?
Thanks.
TOS 5.1.40 (X86) is Released for Update
- crisisacting
- Posts: 265
- Joined: 20 Jan 2022, 16:42
Re: TOS 5.1.40 (X86) is Released for update
One way to figure this out would be that Encrypted Folders require key entry after a restart of TOS.
Beyond the additional menu in TOS itself, there isn't currently a visual representation to quickly identify them.
Re: TOS 5.1.40 (X86) is Released for update
Nor would you necessarily want it. Encrypted folder says "Here is something I want kept private". Identifying such to the casual scanner says "Here is something worth an attempted hack".crisisacting wrote: ↑12 Jul 2023, 15:46 there isn't currently a visual representation to quickly identify them.
F5-221 5.1.123, 8GB System Partition on 3 x 4TB Traid; 3TB EXT4
F2-221 TOS6 (Beta), 8GB System Partition on 2 x 6TB in Traid. (Latest Update 11/04/24)
F2-221 TOS6 (Beta), 8GB System Partition on 2 x 6TB in Traid. (Latest Update 11/04/24)
- crisisacting
- Posts: 265
- Joined: 20 Jan 2022, 16:42
Re: TOS 5.1.40 (X86) is Released for update
On the TOS interface itself, a differentiating icon/marker/description would be helpful.Gremlin wrote: ↑12 Jul 2023, 15:51Nor would you necessarily want it. Encrypted folder says "Here is something I want kept private". Identifying such to the casual scanner says "Here is something worth an attempted hack".crisisacting wrote: ↑12 Jul 2023, 15:46 there isn't currently a visual representation to quickly identify them.
From the protocol aspect, definitely show all folders similarly; unless it's set to public without credentials, every share should already require username+password.
Re: TOS 5.1.40 (X86) is Released for update
After upgrading my TNAS F2-221 from version 5.1.24 to version 5.1.40, on reboot i have 3 beeps and after whe acessing using the browser it gives a "No hard drive detected" message and goes to "Initialization" page.
No ssh or smb access working.
What can I do?
No ssh or smb access working.
What can I do?
Re: TOS 5.1.40 (X86) is Released for update
Have you ever used TOS4? The system partition may be small and there may be an upgrade issue. (Please refer to the red note on the first page) Please try installing TOS 5.124 back.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
- davidecavestro
- Posts: 23
- Joined: 17 Jul 2023, 16:07
Re: TOS 5.1.40 (X86) is Released for update
Just to give feedback: I've just bought a new F2-223, booted and let it init with default config (scratch install I suppose).
At first restart the bootloader complained for missing file, i.e. setup.symbol `grub_fshelp_find_file_lookup` not found
To make it boot again I had to enter BIOS bootloader section and change disks order, moving the internal storage before HDD.
TOS version: 5.1.40
BIOS/initBoot version: 5.19
At first restart the bootloader complained for missing file, i.e. setup.symbol `grub_fshelp_find_file_lookup` not found
To make it boot again I had to enter BIOS bootloader section and change disks order, moving the internal storage before HDD.
TOS version: 5.1.40
BIOS/initBoot version: 5.19
Re: TOS 5.1.40 (X86) is Released for update
Yep, the same i had with the previous version: viewtopic.php?f=28&t=4733&p=27361#p27361
Unfortunatly, my T9-450 dont have an HDMI port to see the error, i had to find out how to use the console port
Thomas
Unfortunatly, my T9-450 dont have an HDMI port to see the error, i had to find out how to use the console port
Thomas
main: T9-450
Re: TOS 5.1.40 (X86) is Released for update
My TNAS was updated and now I could not access it after updating. I regret buying this piece of crap. It should work smoothly after each update, rather than users have to spend time to search on problems before each updating. Such a PITA !