you have not idea?
why you do not insert RTSP string for universal camera?
ONVIF not working or are not compatible with cameras.
You can't develop for your favourite camera alone.
TOS5 is advertised with this software but not work, is not correctly by you.
creating camera doesn't work
Re: creating camera doesn't work
No reply after 1 month.
You updated Surveillance Manager but not working again. i've 9 cameras of various brand but not working one.
I buy this nas for use Surveillance Manager and because you sponsorized this on your site.
Good assistance and good work, my compliments!.
@TMwuu
You updated Surveillance Manager but not working again. i've 9 cameras of various brand but not working one.
I buy this nas for use Surveillance Manager and because you sponsorized this on your site.
Good assistance and good work, my compliments!.
@TMwuu
Re: creating camera doesn't work
Only pick the recommended cameras from the verified models.
viewtopic.php?f=83&t=4685&p=27037&hilit=camera#p27037
and update your TOS 5.1.37 and Surveillance Manager 0.1.24 to the latest version.
viewtopic.php?f=83&t=4685&p=27037&hilit=camera#p27037
and update your TOS 5.1.37 and Surveillance Manager 0.1.24 to the latest version.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: creating camera doesn't work
ONVIF is a standard protocol. The fact various cameras don't work makes it pretty obvious you didn't follow the documentation when implementing it.
If you aren't going to do things right might as well not do them. This is mediocre work, you should be ashamed.
If you aren't going to do things right might as well not do them. This is mediocre work, you should be ashamed.
Re: creating camera doesn't work
For what its worth - I have a dozen Amcrest cameras. All have ONVIF. The older ones (IP2M-841B, IP3M-954E) could be created without any issues. The newer ones ( IP5M-B1276EB-AI, IP8M-2779E-AI) failed consistently with "Camera Busy" error. To get around this problem I simply disabled ONVIF on the new cameras, added them to Surveillane Manager, and re-enabled ONVIF. All cameras work.
I have a different problem where Motion Detection does not work.
I have a different problem where Motion Detection does not work.
Re: creating camera doesn't work
{L_BUTTON_AT}gosavip
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)