[ Dashy ][ 2.0.6.0 ] Organize your self-hosted services

[outkastm]

About : https://dashy.to

Category: Entertainment
Last version: 2.0.6.0
Applicable models: TerraMaster x.64 series
Applicable TOS: 4.1.27 or later versions
App download: https://bit.ly/3kKCiHR

Required packages:
NodeJS > 16.13.0.0

Module WebUI for additional settings can be accesses at
http(s)://yournasip:port/modules/Dashy/www

How to manully install this app on TerraMaster application store?

About:

Live demo can be accessed here https://demo.dashy.to

Dashy is an open source, highly customizable, easy to use, privacy-respecting dashboard app.

[outkastm]

added initial version

[brunix86]

Hi outkastm,

I just tried to install Dashy and it seems to be ok, except the configuration.
The problem is that after reload page or restart the module, Dashy loses the configuration.
If I overwrite the config yml file (usr/local/Dashy/bin/Dashy/public/conf.yml) nothing changes.

In the official website is written:

After making changes to the configuration, the application need to be rebuilt. This should happen automatically once running, but a rebuild can also be manually triggered with yarn build (or docker exec -it [container-id] yarn build in Docker)

But I don't know how to rebuilt the application.

Could you gently help me?
Thanks!

[psikic]

I was setting up Dashy today and in the configuration screen it has this message. Could this package be updated? Thank you!

Dashy version 1.9.0
Update Available: 2.0.6
You are using an unsupported version of Dashy.
For the best experience, and recent security patches, please update to 2.0.6

[psikic]

I had this same problem. To fix it, find the "Update Configuration" button, then click "Rebuild Application" and then "Start Build". For me it takes about 2 minutes, then the configuration is fully saved.

Hi outkastm,

I just tried to install Dashy and it seems to be ok, except the configuration.
The problem is that after reload page or restart the module, Dashy loses the configuration.
If I overwrite the config yml file (usr/local/Dashy/bin/Dashy/public/conf.yml) nothing changes.

In the official website is written:

After making changes to the configuration, the application need to be rebuilt. This should happen automatically once running, but a rebuild can also be manually triggered with yarn build (or docker exec -it [container-id] yarn build in Docker)

But I don't know how to rebuilt the application.

Could you gently help me?
Thanks!

[Hardfecx]

Possible ARM version too? Looks very cool that app!

[brunix86]

I had this same problem. To fix it, find the "Update Configuration" button, then click "Rebuild Application" and then "Start Build". For me it takes about 2 minutes, then the configuration is fully saved.

Hi psikic,
Thank you so much! It works fine!

I have another "minor" problem with Dashy, that is the autostart feature.
In detail, when I reboot\restart the NAS it doesn't start automatically, so I have to start it manually.

[outkastm]

On the WebUI does it says Autostart is Enabled?
I will check this later

[brunix86]

On the WebUI does it says Autostart is Enabled?
I will check this later

Hi outkastm,
Yes, as you can see here:

dashy_autostart.jpg

[Hardfecx]

{L_BUTTON_AT}outkastm

i repeat my question: is there any hope to get an arm version of it?