Page 1 of 2
Windows network
Posted: 08 Feb 2021, 05:22
by La Taupe
Hello, I just bought an F5 422 to replace an old Nas Dlink in my compagny.
I have 2 problems that I don't have with the Dlink.
1- The F5 422 does not appear in the network neighborhood on all windows 10 PC but I can mount network drives "\\F5422\user\XX" on the shares of the F5 422.
2- I cannot copy Mac files of the XXXXX._XXXX type, coming from a windows disk or from the Dlink.
Do you have an idea to help me.
Thank you
Re: Windows network
Posted: 08 Feb 2021, 12:23
by RyanYang
Hi,
1. You can go to the control panel to enable UPnP. If not, please check the related discovery service of your computer.
upnp.png
2. Whether the file contains special symbols, maybe because the attribute of XXXXX._XXXX is hidden, you need to open it to view it even on the computer.
You can set its properties to be visible and then copy it to TNAS.
Re: Windows network
Posted: 08 Feb 2021, 15:32
by La Taupe
Hello, thanks for your reply.
for the UPnP, I will test.
For the rest it does not work. You can see on the left 3 copies of the same file on local disk. Right attempt to copy to F5. I can't do it.
Best regards
Re: Windows network
Posted: 08 Feb 2021, 18:12
by La Taupe
To confirm my problem:
Using SyncBackPro to copy 2 files containing ._
With the Dlink NAS no problem
Syn-OK.jpg
With the F5 422 impossible to copy the same files.
Syn-NO-OK.jpg
The configuration of SyncBackPro being exactly the same.
An idea?
Thank you
Re: Windows network
Posted: 08 Feb 2021, 21:23
by RyanYang
Hello,
Did you use SMB to access TNAS and then copy files on your computer to TNAS failed?
We can't see the failure prompt clearly on your picture. You can provide a clearer picture.
You can separate the two pictures and add them as attachments.
If so, can you send us the failed file? We will verify it and find the reason.
Thanks.
Re: Windows network
Posted: 08 Feb 2021, 23:35
by La Taupe
Hello,
yes i use SMB, i send you by mail 2 files with problems.
Best regards
Re: Windows network
Posted: 09 Feb 2021, 02:16
by La Taupe
I make a new test in FTP mode, F5 422 in FTP server with SyncBackPro in FTP client.
It's working.
FTP \Raid-dossier\
19:12:30 \._PAGE 1.psd Copié vers FTP
19:12:30 \._PAGE 2.psd Copié vers FTP
Best regards
Re: Windows network
Posted: 09 Feb 2021, 02:29
by La Taupe
The copy working, but impossible to see the files in the directory.....
FTP.jpg
Re: Windows network
Posted: 09 Feb 2021, 02:43
by La Taupe
Very strange ,i use admin login for FTP and in the picture you can see root is owner....
Re: Windows network
Posted: 09 Feb 2021, 13:53
by TMS
Hi,
In linux/tos, the file at the beginning of. is hidden. If you want to see it, you need to modify the file name.