[Help] Trying to setup T4-425
Posted: 19 Nov 2026, 23:24
I recently purchased this T4-425. First setup i started with a 28TB drive, during first startup it automatically setup the drive using TRAID. Everything was good. A little later i went to add another drive to the same pool and realized i couldn't because it was smaller than the 28TB, so i started over.
This time i put in 4 drives. A 20 and 6 TB both western digital and a 20 and 28 TB both barracuda's. Powered on NAS and created the system drives. Then i created the storage pool with all 4 drives. Just before going to bed it was at 0.6%. The next morning the storage pool was at 5.5%. I clicked around trying to find the resync speed option to see what it was set to, never found it. When i to tried click on the volume tab it just showed a spinning circle and i could not click on any of the tabs in control panel after that. I could still click elsewhere like the dashboard button on the sidebar or the installed application button on the top bar.
I left it be and came back about 1 1/2 hours later. The spinning circle was still there. I tried clicking around to see how responsive it was but when i clicked on the installed application button the control panel disappeared, the app window never appeared and the top bar disappeared its like it never refreshed. The right side bar does not respond to clicks. The only thing on the desktop is the spinning circle. I then refreshed the browser and it took me back to the login screen. Tried to login. It flashed incorrect username or password. I verified i was entering the password correctly but no go. I then tried clicking the forgot password link. It said username does not exist. I used the same name and password i did the night before. The lights are still flashing and the drives are running.
Has the OS been corrupted? The login page says TOS 6.0. So do i force shutdown the NAS by holding down the power button. And try using 2 drives to start with.
This time i put in 4 drives. A 20 and 6 TB both western digital and a 20 and 28 TB both barracuda's. Powered on NAS and created the system drives. Then i created the storage pool with all 4 drives. Just before going to bed it was at 0.6%. The next morning the storage pool was at 5.5%. I clicked around trying to find the resync speed option to see what it was set to, never found it. When i to tried click on the volume tab it just showed a spinning circle and i could not click on any of the tabs in control panel after that. I could still click elsewhere like the dashboard button on the sidebar or the installed application button on the top bar.
I left it be and came back about 1 1/2 hours later. The spinning circle was still there. I tried clicking around to see how responsive it was but when i clicked on the installed application button the control panel disappeared, the app window never appeared and the top bar disappeared its like it never refreshed. The right side bar does not respond to clicks. The only thing on the desktop is the spinning circle. I then refreshed the browser and it took me back to the login screen. Tried to login. It flashed incorrect username or password. I verified i was entering the password correctly but no go. I then tried clicking the forgot password link. It said username does not exist. I used the same name and password i did the night before. The lights are still flashing and the drives are running.
Has the OS been corrupted? The login page says TOS 6.0. So do i force shutdown the NAS by holding down the power button. And try using 2 drives to start with.