Page 5 of 6
Re: TOS 5.1.41 (X86) is Released for Update
Posted: 19 Aug 2023, 13:21
by TMroy
Something stops your SMB service from normally starting during the system reboot, this moment I do not know what it could be. BUT it is going too far under this topic, please create a new thread for any issue not related to the current TOS update. Thanks!
Re: TOS 5.1.41 (X86) is Released for Update
Posted: 19 Aug 2023, 14:36
by joka388
Gremlin wrote: ↑18 Aug 2023, 17:27
I can confirm SMB was
disabled after restart following above shutdown/restart
Also here
Re: TOS 5.1.41 (X86) is Released for Update
Posted: 19 Aug 2023, 14:48
by Gremlin
Merely confirming 2 previous reports of SMB disabled after restart (and now a fourth!). I suspect it IS related to this update 5.1.41. The "something" appears to be your OS.
Re: TOS 5.1.41 (X86) is Released for Update
Posted: 19 Aug 2023, 15:24
by DERIKKU
Gremlin wrote: ↑19 Aug 2023, 14:48
[at=TMroy post_id=29139 time=1692422519 user_id=1656][/at]
Merely confirming 2 previous reports of SMB disabled after restart (and now a fourth!). I suspect it IS related to this update 5.1.41. The "something" appears to be your OS.
Yes it is. with other firmware i don't have this problem. only with this version

Re: TOS 5.1.41 (X86) is Released for Update
Posted: 19 Aug 2023, 16:15
by RyanYang
What features do you use? Domain, Scheduled Tasks, or anything else?
Re: TOS 5.1.41 (X86) is Released for Update
Posted: 19 Aug 2023, 17:24
by Gremlin
In my case I use a fairly basic setup. Repository for (SMB) backups (which obviously fail after shutdown/restart - hence my comment - and was not an issue prior to 5.1.41), FTP picture storage from multiple CCTV cameras and simple scheduled tasks to clean (using 'find') picture storage. Snapshot is installed, but only 'file system snapshot' is used. USB copy installed, but not active.
Hth.
Re: TOS 5.1.41 (X86) is Released for Update
Posted: 19 Aug 2023, 17:50
by Gremlin
ps I would like to clarify. This (SMB disabled) only happens after a POWER OFF shutdown. It does not happen after a simple 'restart'. Trust that makes things clearer.
Re: TOS 5.1.41 (X86) is Released for Update
Posted: 20 Aug 2023, 13:09
by TMlinda
This problem has not been reproduced in our laboratory, please contact our technical team to conduct a remote inspection for you, you can find the contact information in my signature.
Re: TOS 5.1.41 (X86) is Released for Update
Posted: 20 Aug 2023, 14:25
by crisisacting
Just did a clean install of 5.1.41 into a F5-220 and it also reports:
Code: Select all
BOOT_IMAGE=/boot/bzImage type=raid
when running
through SSH.
Also, the bootloader is only version
1.0.2 on the unit; is that the newest one for it?
Re: TOS 5.1.41 (X86) is Released for Update
Posted: 20 Aug 2023, 15:38
by TMlinda
This is normal, and the latest version 5.1.44 online will be automatically loaded after 30 seconds.