Page 4 of 6

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 16 Aug 2023, 01:47
by Gremlin
Re: Scheduled Startup/Shutdown - Slow transfer speeds

Don't know if this is a clue:
[332618.119964] hpet: Lost 7161 RTC interrupts
[332619.249713] hpet: Lost 7161 RTC interrupts
[332620.377823] hpet: Lost 7160 RTC interrupts
[332621.488050] hpet: Lost 7161 RTC interrupts
[332622.635306] hpet: Lost 7161 RTC interrupts
[332623.768783] hpet: Lost 7161 RTC interrupts
[332624.899920] hpet: Lost 7161 RTC interrupts
[332626.033064] hpet: Lost 7161 RTC interrupts
[332627.168708] hpet: Lost 7161 RTC interrupts
[332628.297503] hpet: Lost 7160 RTC interrupts
[332629.425464] hpet: Lost 7161 RTC interrupts
[332630.552225] hpet: Lost 7161 RTC interrupts
[332631.681454] hpet: Lost 7161 RTC interrupts
[332632.811269] hpet: Lost 7161 RTC interrupts
[332633.935842] hpet: Lost 7161 RTC interrupts
[332635.061693] hpet: Lost 7161 RTC interrupts
[332636.198401] hpet: Lost 7161 RTC interrupts
[332637.327734] hpet: Lost 7161 RTC interrupts
[332638.455454] hpet: Lost 7161 RTC interrupts
[332639.580462] hpet: Lost 7161 RTC interrupts
[332640.708072] hpet: Lost 7160 RTC interrupts
[332641.839916] hpet: Lost 7160 RTC interrupts
[332642.968147] hpet: Lost 7161 RTC interrupts
[332644.093201] hpet: Lost 7161 RTC interrupts
[332645.220317] hpet: Lost 7161 RTC interrupts
[332646.345499] hpet: Lost 7161 RTC interrupts
[332647.477100] hpet: Lost 7161 RTC interrupts
[332648.602670] hpet: Lost 7161 RTC interrupts
[332649.730262] hpet: Lost 7161 RTC interrupts
[332650.851066] hpet: Lost 7161 RTC interrupts
Pages and pages when it happens.

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 16 Aug 2023, 12:04
by TMroy
would you login ssh, and send us the output by command line: cat /proc/cmdline

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 16 Aug 2023, 15:38
by Gremlin
{L_BUTTON_AT}TMroy
cat /proc/cmdline = BOOT_IMAGE=/boot/bzImage type=raid

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 16 Aug 2023, 23:37
by TMroy
The output shows that the configuration is incorrect.
Would you remove all your drives and reboot your TNAS to find the initboot version number from the bottom of the TOS page? appreciate!
After that you need to shut down your TNAS, insert your drives back into the box, and reboot again, then you can come back to your running system.

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 17 Aug 2023, 00:10
by Gremlin
{L_BUTTON_AT}TMroy

What would be "correct"?

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 17 Aug 2023, 09:34
by TMroy
Correct configuration: hpet=disable
We will verify and provide a solution to this issue.

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 17 Aug 2023, 14:32
by Gremlin
Thanks. I'll get back to you with initboot info as soon as I can.

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 17 Aug 2023, 23:52
by Gremlin
{L_BUTTON_AT}TMroy

Bootloader version 1.0.4

Initboot(?): J3355_MAPL0304V22_V5.1.44

Trust that is what you wanted.

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 18 Aug 2023, 10:04
by TMroy
Yes, thank you.

Re: TOS 5.1.41 (X86) is Released for Update

Posted: 18 Aug 2023, 17:27
by Gremlin
I can confirm SMB was disabled after restart following above shutdown/restart