TOS 7.0.1163 (x86) Official Release Update

Official news about TOS, mobile app, PC app updates or beta releases.
User avatar
Gremlin
Gold Member
Posts: 1738
Joined: 02 Dec 2022, 22:31
Great Britain

Re: TOS 7.0.1163 (x86) NTP

Post by Gremlin »

LorenGuo wrote: 28 Aug 2026, 18:21
NTP Update:
Issues related to non sync in Windows and other issues may be device and/or configuration related. Previously I was testing using my F5-221. This is configured with 2 separate IP addresses (on same segment). I have switched the NTP to my F2-424 unit running a single IP address (bonded ALB) - just for laughs, naturally - and everything :?: works! (With the -221 as server, I had tried the different ip addresses as target in the clients, but that didn't change anything as far as I could see.)

More:
F5-221 re-configured with Bond1 as Active backup. This configuration allows NTP service to run correctly.
Last edited by Gremlin on 29 Aug 2026, 23:26, edited 1 time in total.
F5-221 TOS7.0.1188 - 4x4TB (Ironwolf) Traid
F2-424 TOS7.0.1188 - 2x500GB nvme (P3) Traid, 2x6TB HDD (HGST) Traid
F2-221 TOS7.0.1188 - 1x3TB Ext4, 1x4TB Btrfs
F2-425+ TOS7.0.1188 - 2x500GB nvme (P3) Traid, 2x6TB HDD (EXOS) Traid
User avatar
sianderson
Silver Member
Posts: 449
Joined: 02 Aug 2020, 03:42
Great Britain

Re: TOS 7.0.1163 (x86) Official Release Update

Post by sianderson »

updated to to 7.0.1163

upon reboot of the F2-424 the VMS app was not enabled, as a result the VM's did not automatically start, had to go in and enable the APP which then started the process of auto starting them

however the F2-423 worked fine and the VMS app was enabled automatically
F2-424 TOS 7.0.1188
F2-423 TOS 7.0.1188
F2-210 TOS 4.2.44
D4-320

C/O
F4-424 TOS 6.0.794
User avatar
TMroy
TM Support
Posts: 3125
Joined: 10 Mar 2020, 14:04
China

Re: TOS 7.0.1163 (x86) Official Release Update

Post by TMroy »

ruzaj wrote: 29 Aug 2026, 04:42 online update not possible and why manual download speed is so slow? its not because of my download speed. I am located in austria.
Could you specify how slow it is? The slowness may be related to the CDN policies in your region. You might want to try again at a different time.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
User avatar
joka388
Posts: 38
Joined: 07 Mar 2022, 21:42
Austria

Re: TOS 7.0.1163 (x86) Official Release Update

Post by joka388 »

Both NAS updated without issues. Sleep Mode is working :D
F2-221 6 Gb RAM - 2x8TB
F4-425 16 Gb RAM - 4x4TB
User avatar
zelluloid
Posts: 1
Joined: 30 Aug 2026, 18:17
Germany

Re: TOS 7.0.1163 (x86) Official Release Update

Post by zelluloid »

hi, I am currently on 5.1.73 on a F2-212 and want to update to the actual TOS 7 Version.
I have to ssd installed, will those files stay as they are or will the data be erased?
I am using the f2-212 for torrents and plex - so it's really important, that qbittorent server and plex media server work on TOS 7 - are those two apps working?
thank you for your help
zelluloid
User avatar
CursaYang
TM Support
Posts: 896
Joined: 06 Jan 2025, 16:34
China

Re: TOS 7.0.1163 (x86) Official Release Update

Post by CursaYang »

zelluloid wrote: 30 Aug 2026, 18:24 hi, I am currently on 5.1.73 on a F2-212 and want to update to the actual TOS 7 Version.
I have to ssd installed, will those files stay as they are or will the data be erased?
I am using the f2-212 for torrents and plex - so it's really important, that qbittorent server and plex media server work on TOS 7 - are those two apps working?
The ARM version of TOS 7 supports Plex, but qBittorrent is currently not supported.

In addition, the TOS 7.0.1163 version provided in this forum post is intended for x86 models. For ARM-based models, you can upgrade to TOS 7.0.1114.

Please refer to the following forum post for more information:

viewtopic.php?t=10418
To contact our team, please send email to following addresses, remember to replace (at) with @

Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
User avatar
CodeTheFuture
Posts: 44
Joined: 11 Dec 2024, 10:08
Australia

Re: TOS 7.0.1163 (x86) Official Release Update

Post by CodeTheFuture »

Upgrade went fine from last version. "Operation Failed" still occurs when attempting to save any changes in the "Region and Time" are of settings. There is an existing support case with you already for this on the last version.
Last edited by CodeTheFuture on 02 Sep 2026, 16:27, edited 1 time in total.
User avatar
EriChan
TM Support
Posts: 330
Joined: 06 Jan 2026, 12:27
China

Re: TOS 7.0.1163 (x86) Official Release Update

Post by EriChan »

CodeTheFuture wrote: 02 Sep 2026, 14:11
To help us accurately diagnose this issue and confirm whether there is an anomaly within the TOS system, we recommend scheduling a remote technical support session with our engineering team.

Please contact our online technical support via the link below. When reaching out, be sure to include this forum post link and your forum ID so our engineers can quickly reference your context and assist you directly:

https://salesiq.zohopublic.com/signatur ... 97d0be8892
To contact our team, please send email to following addresses, remember to replace (at) with @

Technical team: support(at)terra-master.com(for technical support)
Service team: service(at)terra-master.com(for purchasing, return, replacement, RMA service)
User avatar
Lex
Posts: 55
Joined: 13 Mar 2024, 05:07
Russia

Re: TOS 7.0.1163 (x86) Official Release Update

Post by Lex »

Image
The folder appeared again
F4-423
User avatar
snapsh0t
Posts: 91
Joined: 19 Oct 2025, 03:23
Great Britain

Re: TOS 7.0.1163 (x86) Official Release Update

Post by snapsh0t »

Lex wrote: 02 Sep 2026, 22:28 Image
The folder appeared again
Allegedly fixed in 7.0.1169
F2-425 Plus, 16GB RAM, 2 x 500GB WD SN700 EXT4 RAID1, 2 x 3TB WD Red EXT4 RAID1, TOS 7.0.<latest>
Post Reply

Return to “Update Notice”