It has nothing to do with the connection. It is an authentication issue.sianderson wrote: ↑13 Sep 2020, 00:33 I have just checked my FTP (using 4.1.30) I didn’t even realise it was enabled, I don’t have any port forwards set from outside but using FTP Client Lite it logs me straight in on my iPhone (under wifi) using my username and password and shows me the shares I have set up so certainly natively it all works
I did have to use it’s IP not hostname otherwise it would not connect, have you tried accessing the FTP from within your network, this would make sure it’s not your firewall needing an active / passive FTP connection in the client
TOS 4.1.30 is released for update
Re: TOS 4.1.30 is released for update
- sianderson
- Posts: 293
- Joined: 02 Aug 2020, 03:42
Re: TOS 4.1.30 is released for update
Ok but my point is that it authenticated my user absolutely fine and allowed me to connect
Could it be that you aren’t typing in your passwords correctly?
What happens if you create a new user with a simple password does it allow you to connect
Could it be that you aren’t typing in your passwords correctly?
What happens if you create a new user with a simple password does it allow you to connect
F2-210
4.2.43
4.2.43
- sianderson
- Posts: 293
- Joined: 02 Aug 2020, 03:42
Re: TOS 4.1.30 is released for update
Right think I have it, usernames are case sensitive
I just created a new user called Ftp and then tried logging on as ftp in told me my username or password was incorrect then corrected it to Ftp and it logged me in
Unusual for usernames to be case sensitive
Does this help at all?
I just created a new user called Ftp and then tried logging on as ftp in told me my username or password was incorrect then corrected it to Ftp and it logged me in
Unusual for usernames to be case sensitive
Does this help at all?
F2-210
4.2.43
4.2.43
Re: TOS 4.1.30 is released for update
I can connect to tnas internally and externally thru terminal with any user credentials even "root" and ssh with no issues. It seems like there is a broken link between tnas FTP server and the user database. Other tnas services work just fine.
- sianderson
- Posts: 293
- Joined: 02 Aug 2020, 03:42
Re: TOS 4.1.30 is released for update
Could you confirm if i need to do this, and are there any actual differences?
im guessing its because i manually installed 4.1.30 and its now been released through the auto update system?
im guessing its because i manually installed 4.1.30 and its now been released through the auto update system?
F2-210
4.2.43
4.2.43
- scoobyfizz
- Posts: 104
- Joined: 10 Jun 2020, 15:37
Re: TOS 4.1.30 is released for update
same here please
Best thing I ever did was ebay my Terramaster...
Re: TOS 4.1.30 is released for update
Don't have to update the TOS. The update notice will be closed here.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: TOS 4.1.30 is released for update
I too am having issues with the user authentication for FTP. I did update to the beta 4.2.01 and I can't get it to work.
Re: TOS 4.1.30 is released for update
I found where the issue with the ftp account authentication is. I found that the content of file smbftpd.conf in the folder etc/smbftpd is incomplete. I have compared that file with the same file in etc.default folder which contained much more information. I have replaced the "corrupted" config file in the etc folder by the file stored in the etc.default folder. FTP user authentication is working now without a problem. This might help You to check what has happened after tos 4.1.30 upgrade.
Re: TOS 4.1.30 is released for update
and how is that file copied and rewritten?RonnyK wrote: ↑30 Sep 2020, 02:10 I found where the issue with the ftp account authentication is. I found that the content of file smbftpd.conf in the folder etc/smbftpd is incomplete. I have compared that file with the same file in etc.default folder which contained much more information. I have replaced the "corrupted" config file in the etc folder by the file stored in the etc.default folder. FTP user authentication is working now without a problem. This might help You to check what has happened after tos 4.1.30 upgrade.
I can enter ssh, but little else xD. some easy way to copy the good file, and overwrite the bad one?
Thank you.
F2-221