F4-210 RAm is full without any work
Re: F4-210 RAm is full without any work
I have the same exact issue and also on the f4-210
Re: F4-210 RAm is full without any work
Your InitBoot need to be updated.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: F4-210 RAm is full without any work
Please check the instructions from this link viewtopic.php?f=75&t=647
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: F4-210 RAm is full without any work
What happens if you run 8 or 10 gig od memory?
Re: F4-210 RAm is full without any work
@Tricky What did you mean?
To contact our team, please send email to following addresses, remember to replace (at) with @:
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: F4-210 RAm is full without any work
Those updates where for the ...
Applicable model: F2-210 / F4-210
Download link:
For 1GB Memory model:
http://dl.terra-master.com/cn/firmware.img
For 2GB Memory model:
http://dl.terra-master.com/en/firmware.img
I was asking what happens if you have installed extra memory...however i am not sure that those models can accommodate extra RAM?
Applicable model: F2-210 / F4-210
Download link:
For 1GB Memory model:
http://dl.terra-master.com/cn/firmware.img
For 2GB Memory model:
http://dl.terra-master.com/en/firmware.img
I was asking what happens if you have installed extra memory...however i am not sure that those models can accommodate extra RAM?
Re: F4-210 RAm is full without any work
F2-210/F4-210 do not support adding extra RAM.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
- scoobyfizz
- Posts: 104
- Joined: 10 Jun 2020, 15:37
Re: F4-210 RAm is full without any work
Even after the init boot fix I thing there is a memory leak. A reboot shows 40% ish... then over the course of a day or so creep back up to 90%.. I did have plex server running as it was 'blamed' but I do not now and it is still the same....
Best thing I ever did was ebay my Terramaster...
Re: F4-210 RAm is full without any work
For me the firmware upgrade did apply well,
I've done it with putty, worked fine so far.
The RAM is at round about 12-15% after reboot.
I'll keep an eye on that,
if anything occurs i'll let you know.
Jonas
I've done it with putty, worked fine so far.
The RAM is at round about 12-15% after reboot.
I'll keep an eye on that,
if anything occurs i'll let you know.
Jonas
F4-210
Re: F4-210 RAm is full without any work
...in addition to my last post:
The RAM won't unload after copying data from the internal NAS drives to an external drive (USB) via (Windows-) Computer.
It remains at round about 95% even though i'm not doing anything with my NAS at the moment.
After reboot it remains low (10-20%) but after accessing files or copying them from the nas to another drive or pc the RAM remains full.
sincerly,
Jonas
The RAM won't unload after copying data from the internal NAS drives to an external drive (USB) via (Windows-) Computer.
It remains at round about 95% even though i'm not doing anything with my NAS at the moment.
After reboot it remains low (10-20%) but after accessing files or copying them from the nas to another drive or pc the RAM remains full.
sincerly,
Jonas
F4-210